Discussion about the Korg PolySix synthesizer

>
> Hello Everyone,
>
> I have a problem with the modulation wheel of my polysix,
> cause if i turn the wheel complete down,this non stop the Vco
> modulation and I continue to listen a little ammount of it.
> How I can solve this problem?
>
> Thanks
>
> Giorgio
>

--- In PolySix@yahoogroups.com, "gil_we" <gil_we@...> wrote:
>
> First check the other setting and make sure there IS a problem witht
> he mod wheel setting.
>
> If there is, you can try this - take the mod wheel unit out,
> disassamble the problematic wheel, and change the mod pot position in
> idle (wheel is at min position), then get the platic wheel back.
> Not sure how it will wrk but you can try...
>
> Also, there might be a trimpot for setting the mod while in idle
> position. Check the schematics...
>
>
>
> --- In PolySix@yahoogroups.com, "mondokraftwerk" <mondokraftwerk@>
> wrote:
> >
> > Hello Everyone,
> >
> > I have a problem with the modulation wheel of my polysix,
> > cause if i turn the wheel complete down,this non stop the Vco
> > modulation and I continue to listen a little ammount of it.
> > How I can solve this problem?
> >
> > Thanks
> >
> > Giorgio
> >
>