Discussion about the Korg PolySix synthesizer

Many thanks for the suggestions
next week-end I'll try to fix this problem...
 
best regards

Giorgio.


--- In PolySix@yahoogroups.com, "gil_we" <gil_we@...> wrote:
>
> First check the other setting and make sure there IS a problem witht 
> he mod wheel setting. 
> 
> If there is, you can try this - take the mod wheel unit out, 
> disassamble the problematic wheel, and change the mod pot position in 
> idle (wheel is at min position), then get the platic wheel back.
> Not sure how it will wrk but you can try...
> 
> Also, there might be a trimpot for setting the mod while in idle 
> position. Check the schematics...
> 
> 
> 
> --- In PolySix@yahoogroups.com, "mondokraftwerk" <mondokraftwerk@> 
> wrote:
> >
> > Hello Everyone,
> > 
> > I have a problem with the modulation wheel of my polysix,
> > cause if i turn the wheel complete down,this non stop the Vco
> > modulation  and I continue to listen a little ammount of it.
> > How I can solve this  problem?
> > 
> > Thanks
> > 
> > Giorgio
> >
>