Re: [PolySix] MIDI
2001-10-24 by Tino
yes, me. ... From: Sean Kelly To: Sent: Tuesday, October 23, 2001 5:59 PM Subject: RE: [PolySix] MIDI
Messages
Browse messages
Page 112 of 114 · 5658 messages matched
RE: [PolySix] MIDI
2001-10-23 by Sean Kelly
Hi, Has anyone done the MIDI upgrade by Johannes? Sean
Re: [PolySix] Newby question
2001-10-15 by Ellsworth Hall
... I m a long time Polysix user (since 1984) and I have the MS2K too. It complements the P6 very well. As I just got the P6 MIDIed recently, I can synch both
Re: [PolySix] Newby question
2001-10-15 by Chromatest Pantsmaker
I paid 200 US for mine. I m not sure what the conversion rate is, but mine was also damaged.... (battery problems... surprise!) ... sounds like a good deal
Re: [PolySix] Newby question
2001-10-15 by Tony Allgood
Hi John and welcome to the list, ... oldcrows keyboard maintenance article) to see about the iffy key, but Im not sure about the totally dead key(D2). Any
Newby question
2001-10-15 by John Edwards
Hi, Can anyone help a newbie? I have just bought a POLY6 in my local paper (london, uk) for £165, as I loved the sounds and interface of the synth (although I
SSM2044 and SSM2056 needed
2001-09-24 by amidar123@hotmail.com
Hi there I guess the subject says it all. One voice in my Polysix has completely gone, and I need a replacement SSM2044 (VCF) and SSM2056 (Transient gen). I am
RE: [PolySix] Digest Number 45
2001-09-21 by andrew
You should replace the battery anyway as a matter of course as it *will* leak evetually. Chances are it s just a low battery causing weirdness anyway. ac
Re: [PolySix] Problem!
2001-09-21 by Chromatest Pantsmaker
my guess it s a leaky battery. sounds similar to a problem I had with mine... it was a battery. check the traces on the underside of the board. if there are
Problem!
2001-09-21 by sean@ma.uk.com
Hi, Just dug out my P6, and the voice buttons no longer function, i.e. you can press the buttons but the lights / voice does not change, the synth produces
parts for sale
2001-09-12 by Chromatest Pantsmaker
... Subject: [sdiy] FS: A lot of stuff Date: Tue, 11 Sep 2001 14:29:12 -0700 (PDT) From: TooManySynths To: diy
Re: [PolySix] Help ?
2001-09-11 by The Old Crow
... No LEDs for key assign mode means that something is wrong on the KLM-366 voice board. The first thing to check is that all the cable are attached. Next,
Re: [PolySix] Help ?
2001-09-11 by Chromatest Pantsmaker
yeah, I would say that the problems are on the same board. they almost always are. First off you can track down the schematics for the board, but they really
Help ?
2001-09-11 by stef@foxall.com.au
I have had a Korg Poly6 for many years and loaned it to a mate for the last 6 or so years. It came back with the leaky battery problem. I have an electronics
Re: [PolySix] Poly 6 PCBs for sale
2001-08-30 by zhentil
... UPS is trash, they did the same thing when delivering a P6 to me. Luckily, it was insured, but the UPS representative was seriously skeptical on the
Poly 6 PCBs for sale
2001-08-30 by phaeton777@yahoo.com
I ve just gutted a seriously banged up P6 (thanks UPS!!!). I ll be using most of the front panel boards as spares for my P6 and my MonoPoly, but if anyone
Re: [PolySix] Poly 6 PCBs for sale
2001-08-29 by The Old Crow
... UPS did this to my CS-50. Only now is it getting back into working order: http://www.oldcrows.net/~oldcrow/synth/yamaha/cs50/ A shame about your P6. Save
Re: Schematics of voice board
2001-08-29 by Ken Leonard
... Try http://www.analoguesamples.com/manuals.asp on page 03. I haven t looked at the schems, but that s what the label says they are. The Owners Manual is
Re: [PolySix] Schematics of voice board
2001-08-25 by Tony Allgood
... damaged boards for a reasonable price. Scott is in the US and has helped me out in the past. Well recommended. If you are in the UK you can use my service.
Re: [PolySix] Re: Desperately seeking the patch manual
2001-08-25 by Ken Leonard
... Check here for MIDI kit info: http://groups.yahoo.com/group/PolySix/links/ ...kl... * Ken Leonard - http://www.kleonard.com * Get Outdoors New England -
Re: [PolySix] Schematics of voice board
2001-08-25 by dhuggins
If you want to make your Polysix whole again, someone rebuilds damaged boards for a reasonable price. Old Crow is his name (real is Scott), site is at
Re: [PolySix] Re: Desperately seeking the patch manual
2001-08-25 by dhuggins
Johannes, You have a midi kit? Do you have a website, URL, description? That would great!! Thanks, Dave
Schematics of voice board
2001-08-24 by TooManySynths
I have a polysix that I have chosen to disassemble as it has been damaged by battery leaking. I would like to do something intersting with the main voice
Re: [PolySix] Re: Desperately seeking the patch manual
2001-08-23 by Chromatest Pantsmaker
... nah, your words were just fine man... I still don t see the point of having this list/manual but to each his own! As for me, I ll just twist away
Re: [PolySix] Re: Desperately seeking the patch manual
2001-08-22 by Ken Leonard
... Try starting with the Andromeda or (shudder!) an FM synth...eek! Things get a little complex there. Synths like the PolySix and Minimoog are joys to
Re: Desperately seeking the patch manual
2001-08-22 by Erik Peterson
aye Johannes, that would be the one! i m hoping to use it as a starting point, not to duplicate exact tonal qualities that are adequately produced on some of
Re: [PolySix] Desperately seeking the patch manual
2001-08-22 by Moho Disco
You read my mind... Lava
Re: [PolySix] Re: Desperately seeking the patch manual
2001-08-22 by Chromatest Pantsmaker
... ahh.. no offense was taken. sorry for my choice of wording though. after I had sent the mail, I thought that this might be what you were talking about.
Re: [PolySix] Re: Desperately seeking the patch manual
2001-08-22 by Johannes Hausensteiner
Hi, I think, Erik means the factory setting manual. I have a copy of an original Korg manual called Setting Charts . It consists of the patch charts of two
Re: Desperately seeking the patch manual
2001-08-22 by Erik Peterson
... hmmm....thanks for the prompt reply ben...it s nice to see that this group isn t dead :-) i seem to have offended you with my choice of words, so let me
Re: [PolySix] Desperately seeking the patch manual
2001-08-22 by Chromatest Pantsmaker
... HI! ... wow, a Patch Manual . WTF is that? I ve never heard of such a thing. What does it do? Tell you how to make patches? I must be picturing the
Desperately seeking the patch manual
2001-08-21 by Erik Peterson
Hello all! I m the original owner of a Polysix. I m trying to revitalize it s use in our band, but I cannot locate my patch manual. All KORG has for us is
Re: [PolySix] Polysix Parts
2001-08-19 by dhuggins
Not directly, but keep an eye out on ebay for non-working Polysixes - my guess is that about 1 in 5 on ebay are sold in such a condition (some are obvious
Polysix Parts
2001-08-16 by th007a7914@blueyonder.co.uk
Does anybody know were I can get parts for my polysix as the case is shot the previous owner sprayed the case and tried to tidy it up but it does not look to
Re: [PolySix] Re: [Poly 6]-Cleaning or replacing the key contacts
2001-08-15 by Moho Disco
Sorry, Old Crow got that... and don t even ask for the 2044s... ;^) Lava
Re: [Poly 6]-Cleaning or replacing the key contacts
2001-08-15 by th007a7914@blueyonder.co.uk
... contacts ... do you still have the top panel as mine is very bad.
Re: [PolySix] [Poly 6]-Cleaning or replacing the key contacts
2001-08-14 by Moho Disco
That all depends on what you want... Lava
Re: [PolySix] [Poly 6]-Cleaning or replacing the key contacts
2001-08-14 by Chromatest Pantsmaker
... what about the rest of the p6?
Re: [PolySix] [Poly 6]-Cleaning or replacing the key contacts
2001-08-13 by Tony Allgood
... Well what ever you do, don t do what the ex-owner of this Polysix I have to fix right now. It didn t work; memory problems, lights not working. So he
Re: [PolySix] [Poly 6]-Cleaning or replacing the key contacts
2001-08-13 by Scott Shingle
Heehee, well, I ll keep that in mind. :) Anyway, thanks for all the tips. I ll screw around with it and let the group know how it turns out. At the very least
Re: [PolySix] [Poly 6]-Cleaning or replacing the key contacts
2001-08-13 by Moho Disco
And if that doesn t work, I have a full keyboard of polysix key contacts that works that I d sell you for cheap... Lava
Re: [PolySix] [Poly 6]-Cleaning or replacing the key contacts
2001-08-12 by Andrew Dennison
Hi there... This post (courtesy of Fred Warren) is from an earlier incarnation of the polysix list. I ve performed this procedure on three Polysixes with 100%
Re: [PolySix] [Poly 6]-Cleaning or replacing the key contacts
2001-08-12 by André Hartung
Hi Scott, under www.oldcrows.net/~oldcrow/synth/korg/polysix/index.html you find a detailed instruction on cleaning the contacts of your P6. If this doesn t
[Poly 6]-Cleaning or replacing the key contacts
2001-08-12 by Scott Shingle
Hi. I ve got an old Poly 6 that I found moldering in a friends basement. Everything worked on it except several of the keys have to really be mashed in order
Re: Another newbie...
2001-06-26 by dhuggins@hypernova.net
I second that. What is the URL? I have done a websearch, and keep getting unreachable websites. Thanks! Dave
P6 Unison detune
2001-06-17 by Ricardo Del PooLP
Hello, I recently acquisition Polysix. I am interested party by the modification p6 Unison detune , unfortunately I did not yet to find an explanation
Re: [PolySix] Now that's fat
2001-06-15 by Kristofer Ulfves
... Well, that ll work if you detune the different voices by the fine-tune pots found on the voice-card, but really is no option if you want to change swiftly
More mods I have done.
2001-06-14 by Tony Allgood
Hi all, I wondered about the quality of the little VCAs in the P6. So I changed one of the voices to a VCA based around the BA662 Roland OTA. The BA part is
Re: [PolySix] Now that's fat
2001-06-14 by Tony Allgood
Hi Kristofer, Right the resistor you are changing to get your 7 semitones detune is simply one half of a potential divider. By changing R116, a 220R resistor,
Re: [PolySix] Now that's fat
2001-06-14 by Kristofer Ulfves
... Hmmm...how exactly does your mod work? Which resistor have you replaced with a pot? I myself based my mod on the information I retained from this list and