FS: Polysix spares
2003-03-03 by Tony Allgood
I m scrapping a complete polysix due to horrific battery damage to the memory board. If anyone wants any parts, then let me know. I am based in the UK.
Messages
Browse messages
Page 108 of 114 · 5658 messages matched
PolySyn VST-I just released and uploaded!
2003-03-02 by gohei <resofactor@yahoo.com>
as promised, here is the VASTNY PolySyn! feel free to distribute this VSTi as discussed in the license agreement on the PolySyn.doc file. this first mailing
New file uploaded to PolySix
2003-03-02 by PolySix@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the PolySix group. File : /PolySyn.zip
Soundscapes Concert Series with vidnaObmana
2003-03-01 by Bill Fox
The Soundscapes Concert Series proudly presents vidnaObmana in an all ages concert of space music at the City of Bethlehem s IceHouse on Sand Island 56 River
Re: [PolySix] P6 keyboard repair
2003-03-01 by Johannes Hausensteiner
I had the same with my Polysix. I did the following: You need: * a piece of aluminium foil, the kind you pack food into * a standard office hole-puncher * dual
P6 keyboard repair
2003-02-28 by roy s.
hi guys, i m new to the group... i ve looked in the archives, but didn t find an answer to this question, so here goes- i have a polysix that i ve replaced the
ignore me..just seen previous entry on subject.
2003-02-28 by dagga36 <dagga36@yahoo.com>
midi interface??
2003-02-28 by dagga36 <dagga36@yahoo.com>
anyone know anything at this midi interface?? http://members.aon.at/virtual-music can t see what it clips to to require no soldering..anyone got one?? any
thanks KEN!!!
2003-02-26 by gohei <resofactor@yahoo.com>
is it possible that i could up my free vst sometime later this week? I don t understand the question. Did you want to upload it to the files area on the
to moderator
2003-02-26 by gohei <resofactor@yahoo.com>
is it possible that i could up my free vst sometime later this week?
POLY VST
2003-02-25 by Orlandi Marco_Arcadio
poly-six RackMount VST virtual synth
2003-02-25 by alfred trautman
greetings all. i m new to the group. my poly six story starts, when many years ago i found a Korg PolySix in immaculate condition in a paw shop for $75. about
Sorry - My Mistake
2003-02-24 by Bill Fox
Sorry. I didn t mean to send you my radio show playlist. I ve sorted out my addressbook to prevent that from happening again. I will, however, send
Re: Patch files and Patch editors
2003-02-24 by comraderecords <comraderecords@bigpond.c
Hi Margus, did you end up putting this program onto the web? Sounds great! Regards, Ben. ... this. ... into ... be ... affects ... from ... tune ... dumps ...
Re: Problems saving patches
2003-02-23 by springpan <springpan@yahoo.com>
Ben, Greetings! Sorry to hear about your Polysix problems. Your problem seems a bit strange, but I can give you a couple of things to try. First I would ring
Problems saving patches
2003-02-23 by comraderecords <comraderecords@bigpond.c
Hi all, I recently got my Polysix working fairly well but I seem to have developed a new problem: when trying to save a patch to a new BANK, it seems to
EMUSIC Playlist #309 for February 20, 2003
2003-02-21 by Bill Fox
[ Best viewed using a fixed spacing font. ] EMUSIC is an electronic, ambient, and space music show, that airs each Thursday at 11:00 pm on WDIY 88.1 FM,
99% There!
2003-02-21 by springpan <springpan@yahoo.com>
Hello all, Thanks to all of your previous posts, schematics, and advice, I now have my Polysix working at about 99%. The latest problem with the keyboard not
Orbital Decay at the Soundscapes Concert Series
2003-02-18 by Bill Fox
The Soundscapes Concert Series p r o u d l y p r e s e n t s Orbital Decay in an all ages concert of spacemusic at the City of Bethlehem s IceHouse on Sand
Re: [PolySix] Re: Patch files and Patch editors
2003-02-17 by J. Hausensteiner
Congratulations! I did the same and added the .WAV file format to my Polysix editor program I did for my MIDI upgrade kit (have a look at:
Re: [PolySix] Re: Patch files and Patch editors
2003-02-17 by dko4342@vip.cybercity.dk
... Pleeeeaaasse! Yes! Let s see it. I would love to see this program! Frank Carvalho
For sale: Polysix with midi and other mods
2003-02-17 by Tony Allgood
Hi all, I m selling my polysix. (gasp) Its been good to me, but I need to make room for other things. This one has midi installed. Its a simple note on/off
Re: Patch files and Patch editors
2003-02-17 by mkliimask <margus.kliimask@mail.ee>
... signal to your computer (.wav/.aiff) and examine the waveform in your favorite audio editor. cut and paste, and then play back into your polysix... ...
Re: [PolySix] SRAM Needed!
2003-02-15 by The Old Crow
... Go to http://www.jameco.com/ Search for item# 43238 (HM6514 1K x 4 CMOS static RAM) That is what I use for repairs. It is equivalent to the TC5514 and the
Re: [PolySix] SRAM Needed!
2003-02-15 by Stefan Rinass
Hi, i´m sure that you will not find easy a 5114 RAM (if, then to a horrible price), just take the 2114, it´s the same (1K*4) The 5114 was produced by
SRAM Needed!
2003-02-15 by springpan <springpan@yahoo.com>
Greetings to all. My name is Jim and I m new to this group. First, I want to thank everyone whose info and replies I have been reading here in Polysix land.
RE: [PolySix] Before going too far, check your connectors!
2003-02-10 by Frank Blades
Good call! I think we forget that sometime it can be the little obvious things that cause malfunctions . Sounds like you got yourself a bargain there then:)
Before going too far, check your connectors!
2003-02-08 by comraderecords <comraderecords@bigpond.c
Hi all, I recently bought a malfunctioning Polysix and after having a look inside I noticed the battery had already been removed and there was some minor
Re: [PolySix] All LEDs lit at power-up
2003-02-06 by Chromatest Pantsmaker
I use minidisc... :) same advantages, don t need the computer... ... From: David Davis ... --
Re: [PolySix] All LEDs lit at power-up
2003-02-06 by David Davis
Oh don t worry, I always have my patches backed up! :-) (Tip for this, if it s never occured to you before - I do this with all my old synths that have a
Re: [PolySix] All LEDs lit at power-up
2003-02-05 by Chromatest Pantsmaker
when I got my p6, it had the original battery replaced with another nicad, but I replaced it with a li-ion anyhow. I also found some bad traces that the
Re: [PolySix] All LEDs lit at power-up
2003-02-05 by David Davis
Eeek! I got my PS6 in 1995..... that was 8 years ago.... ....so I guess even if the previous owner replaced the NiCd battery, it could be due a new one now
Re: [PolySix] All LEDs lit at power-up
2003-02-05 by The Old Crow
... That is the power on reset timer resetting the patch manager (KLM-367) microcontroller. It shouldn t, however, take a minute for it to come out of
Re: [PolySix] All LEDs lit at power-up
2003-02-05 by J. Hausensteiner
Hi, This is - if it takes one or two seconds - normal behaviour. During power-on reset, when the microcontroller is not in normal work. But this should not
All LEDs lit at power-up
2003-02-05 by David Davis
Hi there, I have owned a Polysix for about 8 years now. One thing I ve always wondered about is this: Generally, when I switch the Polysix on, all the LEDs on
Re: [PolySix] polys on ebay...
2003-02-02 by The Old Crow
... I m certainly not getting any money...but I don t care as it is good exposure for leading other polysix owners in to noticing and repairing their boards.
polys on ebay...
2003-01-31 by Chromatest Pantsmaker
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2503998943&category=29552 just wondering if the old crow was getting any money off of this auction, as the
Re: Calibration question(s)
2003-01-30 by winzigus <at@terbrack.net>
Sorry, I had a typo in my original question, I am still wondering what to adjust to get 0V at CN05-7 (_not_ the 8V on CN05-11) If I adjust VCF CUTOFF to 0V, my
Re: Calibration question(s)
2003-01-30 by winzigus <at@terbrack.net>
Johannes, Thanks for your detailed explantion. I initialy adjusted the RESONANCE knob for 8V, unfortunately my max. resonance frequency is about 16KHz in step
Re: [PolySix] Calibration question(s)
2003-01-29 by J. Hausensteiner
Hi, 1) Adjust the RESONANCE knob for a 8.000V reading on the DVM. When trying to accomplish this you will notice that there are discrete steps in the value.
Calibration question(s)
2003-01-29 by winzigus <at@terbrack.net>
Hi, After bringing my dead Polysix back to life (Battery leakage, faulty SSM 2056 s) I decided to give him a completely new calibration. There are 2 points in
FISARMONICA sound program
2003-01-28 by Orlandi Marco_Arcadio
In order to get a Fisarmonica sound ,I have programmed this initial patch on my Polysix: VCO: Octave=8 Waveform=PW Pw=0 to 6 Sub Osc=1oct VCF: Cutoff=7
Re: [PolySix] Common symptons of battery leakage damage?
2003-01-28 by Johannes Hausensteiner
Hi there, I have already (partly) done this based on the work of Ricard Wolf from Sweden and added MIDI capabilities to the Polysix. I can tell you that this a
Re: [PolySix] Common symptons of battery leakage damage?
2003-01-27 by stefan irinass
Humm.... i´ve also think about to make a replacement Board but why doing it 1:1? I mean, just use the an ATMEL AVR 8515, he has 32 I/o-Lines, two internal
Re: [PolySix] Common symptons of battery leakage damage?
2003-01-27 by The Old Crow
... I have a 50% artworked KLM-367 replacement layout in my PCB CAD, but I stopped to consider a dilemma: make the board a direct clone of the original KLM-367
Re: [PolySix] Common symptons of battery leakage damage?
2003-01-27 by Tony Allgood
Not wanting for you to get too downhearted but it is possible to come up against a board so badly damaged that you cannot realistically repair it. I have one
Re: [PolySix] Common symptons of battery leakage damage?
2003-01-26 by KS
Hello All The problem probably lies in damaged tracks or pads on the PCB. I have fixed 3 P6 s and all had this problem . Some were worse than others, but all
Re: [PolySix] Common symptons of battery leakage damage?
2003-01-26 by stefan irinass
Thanks but i believe you can forget my Boards, they are -really- destroyed. But what i found out afterwards, are those A,B and C lines of CN11 on the KLM-369
Re: [PolySix] Common symptons of battery leakage damage?
2003-01-23 by Chromatest Pantsmaker
... From: st@rinass.de Date: Wed, 22 Jan 2003 12:15:56 +0100 To: PolySix@yahoogroups.com Subject: Re: [PolySix] Common symptons of battery leakage damage? ...
Schematics question
2003-01-22 by stefan irinass
Hi, i strongly believe that on my KLM-367 the _Data_ Line from Connector CN1 is defect and if i do a Traceroute from Pin2 DATA i see that he goes diretly to