OldSynths

I'm currently modding a Moog Source to use real momentary switches
instead of the failing membrane panel. I'm not sure if anyone's done
this before. Atleast I couldn't find any record of it on the web.

I'm going to publish a step by step picture tutorial on my website,
if anyone's interested. I'll have all the pin outs for each switch
listed Example: Switch 1 = (ribbon #, pin), (ribbon #, pin). It's
definately not rocket science, but it will take the pain out of
following each trace from switch to ribbon.

It should be up in a few weeks!

-Mike Walters
www.mysterycircuits.com

Mike, this is some seriously good news, I have a Moog Source with a
fully working membrane panel(knock on wood...), but I'm really
paranoid of when it's going to die.
Couple of years ago there was some discussion in the Analogue Heaven
mailing list that somebody would maybe start to re-manufacture those
membrane panels, but I never heard whether they were made or not.

Good luck!
Einar

--- In oldsynths@yahoogroups.com, "Mike Walters" <mike@m...> wrote:
> I'm currently modding a Moog Source to use real momentary switches
> instead of the failing membrane panel. I'm not sure if anyone's
done
> this before. Atleast I couldn't find any record of it on the web.
>
> I'm going to publish a step by step picture tutorial on my
website,
> if anyone's interested. I'll have all the pin outs for each switch
> listed Example: Switch 1 = (ribbon #, pin), (ribbon #, pin). It's
> definately not rocket science, but it will take the pain out of
> following each trace from switch to ribbon.
>
> It should be up in a few weeks!
>
> -Mike Walters
> www.mysterycircuits.com

Great! I wasn't sure what interest it might have to anyone. I'll let
you know!
-Mike Walters
www.mysterycircuits.com

--- In oldsynths@yahoogroups.com, Einar Ekström <einarekstrom@y...>
wrote:

> Mike, this is some seriously good news, I have a Moog Source with a
> fully working membrane panel(knock on wood...), but I'm really
> paranoid of when it's going to die.
> Couple of years ago there was some discussion in the Analogue

Heaven

> mailing list that somebody would maybe start to re-manufacture

those

> membrane panels, but I never heard whether they were made or not.
>
> Good luck!
> Einar
>
> --- In oldsynths@yahoogroups.com, "Mike Walters" <mike@m...> wrote:
> > I'm currently modding a Moog Source to use real momentary

switches

> > instead of the failing membrane panel. I'm not sure if anyone's
> done
> > this before. Atleast I couldn't find any record of it on the web.
> >
> > I'm going to publish a step by step picture tutorial on my
> website,
> > if anyone's interested. I'll have all the pin outs for each

switch

> > listed Example: Switch 1 = (ribbon #, pin), (ribbon #, pin). It's
> > definately not rocket science, but it will take the pain out of
> > following each trace from switch to ribbon.
> >
> > It should be up in a few weeks!
> >
> > -Mike Walters
> > www.mysterycircuits.com