Hi Rory,
thanx for the offer
got a pdf copy off the web along with an OZ pdf.
don't have an OZ(yet)
push button was bad....replaced.
Was having trouble with the A/R on the VCA.
Acting like a S&H at mid positions of the Attack.
Increased 470K feedback resistor to 560K.
Less current feedback, now doesn't latch up.
On to the VCA...
I see approx 2Vpp at top of wiper for tri and squ.
Do U know what the output(pp) of the Gnome is supposed to be?
I've sanded and refinished the wood ends.
Also, figured out a better way to hold down the strip
without relying on cardboard so it always stays connected
even when removed from the groove.
Thinkin bout resurecting the PDS.
Howz about adding a d2A?
then could play bass!!! Crazy PAIAfan!!
I have a PDS photocopy plus the RE article if anyone needs.
Music Machine doesn't have all of it.
Thanks again for the Gnome offer.
tb22
thanx for the offer
got a pdf copy off the web along with an OZ pdf.
don't have an OZ(yet)
push button was bad....replaced.
Was having trouble with the A/R on the VCA.
Acting like a S&H at mid positions of the Attack.
Increased 470K feedback resistor to 560K.
Less current feedback, now doesn't latch up.
On to the VCA...
I see approx 2Vpp at top of wiper for tri and squ.
Do U know what the output(pp) of the Gnome is supposed to be?
I've sanded and refinished the wood ends.
Also, figured out a better way to hold down the strip
without relying on cardboard so it always stays connected
even when removed from the groove.
Thinkin bout resurecting the PDS.
Howz about adding a d2A?
then could play bass!!! Crazy PAIAfan!!
I have a PDS photocopy plus the RE article if anyone needs.
Music Machine doesn't have all of it.
Thanks again for the Gnome offer.
tb22
--- In oldsynths@yahoogroups.com, Rory McDonald <rmcdonald@w...> wrote:
> I have the Gnome docs if you need a copy.
> Rory McDonald
> Oldsynths Moderator