Re: [newmellotrongroup] Re: Alcohol / Pinchrollers
2007-11-27 by kinchmusic@aol.com
Who stole the title of my life story? Andy K (Still here)
Messages
Browse messages
Page 373 of 376 · 18798 messages matched
Re: [newmellotrongroup] Re: Alcohol / Pinchrollers
2007-11-27 by lsf5275@aol.com
In a message dated 11/27/2007 12:26:01 P.M. Eastern Standard Time, ecclesreinson@rogers.com writes: Sometimes the shorter oilers have higher capacity and a
Re: Alcohol / Pinchrollers
2007-11-27 by ceccles_ca
... My oiler has a long spout, Sometimes the shorter oilers have higher capacity and a better pump.
Re: CMC4
2007-11-27 by ceccles_ca
... Jon: Jim s is #872. That s close too. Clay
Re: [newmellotrongroup] CMC4
2007-11-27 by gino wong
I like my wobble gw
Re: [newmellotrongroup] CMC4
2007-11-27 by MAinPsych@aol.com
In a message dated 11/27/2007 7:27:11 AM Eastern Standard Time, mellotronist@cox.net writes: I believe that s the closest to my #886 that I ve seen yet. #920
RE: [newmellotrongroup] CMC4
2007-11-27 by Hessel Herder
Agreed, CMC4 s are most common in M300 s aren t they _____ From: newmellotrongroup@yahoogroups.com [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of
Re: [newmellotrongroup] CMC4
2007-11-27 by lsf5275@aol.com
In a message dated 11/27/2007 6:29:55 A.M. Eastern Standard Time, hessel@soundscape.nl writes: Hi Frank, #920 Regards,H I m surprised that it doesn t have a
Re: [newmellotrongroup] CMC4
2007-11-27 by lsf5275@aol.com
In a message dated 11/27/2007 2:59:20 A.M. Eastern Standard Time, tronbros@aol.com writes: It s all down to motors that are 25 years passed their sell by date
RE: [newmellotrongroup] Re: CMC4
2007-11-27 by Hessel Herder
I ll check it out, thanks ! If you do find those pics great _____ From: newmellotrongroup@yahoogroups.com [mailto:newmellotrongroup@yahoogroups.com] On Behalf
Re: CMC4
2007-11-27 by tomdcour
... motor itself, the wooden mount and the belt pulley. If you don t have one then our servos are different, I will look for some photos.
Re: CMC4
2007-11-27 by tomdcour
Yes indeed--- In newmellotrongroup@yahoogroups.com, tomdcour ... famously
Re: CMC4
2007-11-27 by tomdcour
... effect you describe. I cleaned the tape head that was reading sync information off the motor gear- it was absolutely covered with crap. After that my tron
RE: [newmellotrongroup] CMC4
2007-11-27 by Hessel Herder
How is yours behaving then ? : ) _____ From: newmellotrongroup@yahoogroups.com [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of mellotronist Sent:
Re: [newmellotrongroup] CMC4
2007-11-27 by mellotronist
I believe that s the closest to my #886 that I ve seen yet. #920
RE: [newmellotrongroup] CMC4
2007-11-27 by Hessel Herder
Hi Frank, #920 Regards,H _____ From: newmellotrongroup@yahoogroups.com [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of lsf5275@aol.com Sent: dinsdag 27
Re: [newmellotrongroup] CMC4
2007-11-27 by tronbros@aol.com
In a message dated 26/11/2007 21:07:06 GMT Standard Time, hessel@soundscape.nl writes: Occasionally,Occasionally, my Tron appears to be a bit wobbly all
RE: [newmellotrongroup] CMC4
2007-11-27 by james.parthun@att.net
872 has the same problem! Regards, Jim Parthun Parthun Enterprises, Inc. 630/968-8731 Office 630/968-8732 Fax 630/533-8340 Cellular _____ From:
Re: [newmellotrongroup] howdy
2007-11-27 by john barrick
Heh. Suckered in another one....
howdy
2007-11-27 by wildmanatm55
Hi gang it s Tony #510 in Tampa, Fl. I m looking forward to a fresher, friendlier group and have been told that this is it! Tony Moffett M400SM #510 back in
Re: [newmellotrongroup] Re: Alcohol / Pinchrollers
2007-11-27 by lsf5275@aol.com
In a message dated 11/26/2007 7:13:14 P.M. Eastern Standard Time, JMoore6397@aol.com writes: Good old fashion Man Oil........ That shit is a mess. Every time
Re: [newmellotrongroup] CMC4
2007-11-27 by lsf5275@aol.com
In a message dated 11/26/2007 4:07:38 P.M. Eastern Standard Time, hessel@soundscape.nl writes: Hi guys, Occasionally,Occasionally, my Tron appears to be a
Re: [newmellotrongroup] Re: Alcohol / Pinchrollers
2007-11-27 by JMoore6397@aol.com
Good old fashion Man Oil........ Jimmy Moore **************************************Check out AOL s list of 2007 s hottest products.
Re: Peer pressure succeeds again...
2007-11-26 by john barrick
Hi Frank, I thought that was in reference to the M4000, not the M5000. jb ... taken delivery yet.
CMC4
2007-11-26 by Hessel Herder
Hi guys, Occasionally,my Tron appears to be a bit wobbly all over the keyboard,even after warmup,just playing one note,any note.It even seems to be a
Re: [newmellotrongroup] Re: Peer pressure succeeds again...
2007-11-26 by MAinPsych@aol.com
In a message dated 11/26/2007 2:36:34 PM Eastern Standard Time, trolldelux@aol.com writes: Good question about the M5000: have any been sold? T. Maher Canton,
Re: [newmellotrongroup] Re: Peer pressure succeeds again...
2007-11-26 by tronbros@aol.com
In a message dated 26/11/2007 19:36:54 GMT Standard Time, trolldelux@aol.com writes: Good question about the M5000: have any been sold? We have firm orders
Re: [newmellotrongroup] Re: Peer pressure succeeds again...
2007-11-26 by trolldelux@aol.com
Good question about the M5000: have any been sold? T. Maher Canton, MI Not a Tron owner, yet a TronSnob ... From: thinkingalouduk
Re: Peer pressure succeeds again...
2007-11-26 by ceccles_ca
... actually. Maybe if I put ... My 2 cents - There are good digital samples of fine Pianos. Pianos will not become obsolete. There are good digital samples
Re: Peer pressure succeeds again...
2007-11-26 by thinkingalouduk
Er ... um. Well, thanks everyone for all the kind words. I m a bit speechless actually. Maybe if I put M-TRON in capitals... Well... er. Yeah, so when are
Re: Peer pressure succeeds again...
2007-11-26 by ceccles_ca
... http://www.thinking-aloud.co.uk/ Nice flute work on So Remote . Is that you Owen? It looks like you are also the tape operator, recording engineer,
Re: Peer pressure succeeds again...
2007-11-26 by Steve
hey! interesting to find you here. my brother (a guitarist and virtual tronnist) turned me on to your website just a few months ago. i like your tunes. Steve
Re: [newmellotrongroup] Re: Peer pressure succeeds again...
2007-11-26 by pete
I ll 3rd that-keep up the great work Owen! Pete
RE: [newmellotrongroup] Re: Peer pressure succeeds again...
2007-11-26 by Hessel Herder
Agreed! You ve got some very interesting material on there and tastefull Mellotron playing! Cheers,H _____ From: newmellotrongroup@yahoogroups.com
Re: Peer pressure succeeds again...
2007-11-26 by ceccles_ca
... Illusions of grandeur indeed. Your material is so nicely arranged and recorded Owen. I can imagine the time and effort involved. The 1st track that I
Peer pressure succeeds again...
2007-11-25 by thinkingalouduk
Hello all. Just migrated from the old to the new. As a Virtual Tronnist, I am hoping that this same peer pressure will eventually lead me to selling the kids
Electrical Engineering Lesson
2007-11-25 by Rick Blechta
An Indiana wife called the local phone company to report that her telephone usually failed to ring when her friends called, and that on the few occasions
So Clay's the new Don...
2007-11-25 by tronlord927
... I guess that makes him The Tronfather J.P. MicroTron 001: ... Leave The M4000 with me... and take the cannoli...
[Fwd: [ProgAndOther] Yes fans in an alternate reality]
2007-11-25 by pete
http://www.youtube.com/watch?v=3NDNcRuoWwk http://www.youtube.com/watch?v=3NDNcRuoWwk Pretty funny! -- Have fun! Roy DeRousse ... The Prog and Other Mailing
RE: [newmellotrongroup] Alcohol / Pinchrollers
2007-11-25 by Bruce Daily
Hello- I agree that oils should be avoided in lubricating the tron. But, penetrating oils (like WD-40 or 3-In-1) and silicone based oils, should be avoided
Re: [newmellotrongroup] Just to let you know...........
2007-11-25 by mellotronist
Kinda like squeezing different sounds out of the same orifice, ain t it? At my age that happens more every day.
Re: [newmellotrongroup] Just to let you know...........
2007-11-25 by Bruce Daily
Kinda like squeezing different sounds out of the same orifice, ain t it? A true pan flute would include interactive resonances from the other nearby chambers,
Re: [newmellotrongroup] Alcohol / Pinchrollers
2007-11-25 by lsf5275@aol.com
In a message dated 11/24/2007 5:54:45 P.M. Eastern Standard Time, hessel@soundscape.nl writes: Once treated as such,will your way of cleaning them avoid any
Re: [newmellotrongroup] Re: Alcohol / Pinchrollers
2007-11-25 by john barrick
An odd request, but why not? I ll trade you some for a couple of new tape frames. Let s see....Mk II 3 violins, flute, and Tenor Sax on one and M300b, Oboe,
Re: [newmellotrongroup] Re: Alcohol / Pinchrollers
2007-11-25 by tronbros@aol.com
Sperm? Anybody? Streetly Electronics - All Things Mellotronic _www.mellotronics.com_ (http://www.mellotronics.com/) US Sales East: Jimmy Moore_
Re: Alcohol / Pinchrollers
2007-11-24 by Bernie
Can you use Graves 190? Whatever s left over could then be mixed with beer and punch for a little Hop, Skip and Go Naked. Bernie ... pinch rollers ...
Re: [newmellotrongroup] Alcohol / Pinchrollers
2007-11-24 by Mike Dickson
WD40 will dry out in a days, if not hours. It s a short-term solution at best. If you want a slightly better alternative then try Servisol which appears to
Re: Alcohol / Pinchrollers
2007-11-24 by partune
Thanks! At long last I have a use for my Dremel!!! reagards, partune ... rollers ... eventually ... (carefully) and clean ... deburr the ... reinsert the axle
RE: [newmellotrongroup] Alcohol / Pinchrollers
2007-11-24 by Hessel Herder
Hi Frank, I have used WD40 on making pinchrollers spin again. Once treated as such,will your way of cleaning them avoid any possible attraction of dirt? Ta H
RE: [newmellotrongroup] roller oil- suggestions please
2007-11-24 by Hessel Herder
Hi James! What I did with #920 is remove the offending pinchrollers from the keys and first clean it with one of these cans containing compressed air,then