The Mellotron Group group photo

Yahoo Groups archive

The Mellotron Group

Index last updated: 2026-04-03 22:19 UTC

Messages

Browse messages

Page 26 of 376 · 18798 messages matched

Re: [newmellotrongroup] Effect Advice

2014-04-30 by Chris Dale

It sounds like one track has an almost dry tape echo with a very short decay time and the other is spring reverb or EMT plate reverb. I agree with Clay that

Thread view Attachments: 0

Re: [newmellotrongroup] Effect Advice

2014-04-30 by <ecclesreinson@rogers.com>

EQ--- They may have chopped off most of the top end above 8,000 or 9,000 hz. Even the usual 6,000 hz peak seems rolled off. I agree with all of you. It does

Thread view Attachments: 0

Re: [newmellotrongroup] Effect Advice

2014-04-30 by fdoddy@aol.com

I m with Gino on this one, as one side feels louder than the other. I did not audition the track in mono, as that would give a little more indication about the

Thread view Attachments: 0

Re: [newmellotrongroup] Effect Advice

2014-04-30 by DiPaolo Richard

I have done the tape echo live, using a 1/4 reel-to-reel. One side dry the other the delayed echo. That does work awesome for spanning Gino! Rich D.

Thread view Attachments: 0

Re: [newmellotrongroup] Effect Advice

2014-04-30 by gino wong

You know James. I did note a BJH sort of lovely string swirl, from around that time as well. . ... -- *Gino Wong Birgelo* BSComm, BSEE, ReRED Recording,

Thread view Attachments: 0

Re: [newmellotrongroup] Effect Advice

2014-04-30 by gino wong

Tape echo. Easist done with an open reel deck or two Your double tracking could be spill BIg plate reverbs can mess up sound like that too. ... -- *Gino Wong

Thread view Attachments: 0

Re: [newmellotrongroup] Effect Advice

2014-04-30 by James Parthun

Could this lovely string sound be a Mellotron M300?? ... -- Regards, James Parthun Parthun Enterprises, Inc. C 630.533.8340 O 630.968.8731 F 630.968.8732

Thread view Attachments: 0

Effect Advice

2014-04-29 by Mike Dickson

A question for those with talented ears: I m going to put some Tron down on a tune recorded by a mate, and I was hoping to get a sound similar to that which

Thread view Attachments: 0

Re: Weird

2014-04-21 by <tron400@yahoo.com>

A lot of us received it. Bernie

Thread view Attachments: 0

Weird

2014-04-21 by Mike Dickson

That was odd...I received s spam email from Frank Samagaio s e-mail address the other day. Odd to see MainPsych appear again.

Thread view Attachments: 0

Fw: news

2014-04-20 by kinchmusic@aol.com

Hi! News: http://blog.forjusp.org/ipj/info.php kinchmusic@aol.com

Thread view Attachments: 0

Re: Novatron 400 SM for Sale

2014-04-18 by <marabus@charter.net>

Just a reminder my unit is still for sale. Pete Hi all, I m selling my Novatron Model 400 SM/Serial # 1835. This machine is exactly the same as any other

Thread view Attachments: 0

Nice Boulder Co 'Tron

2014-04-18 by Bruce Daily

Hi all- A tron just appeared on eBay (item # 351051385680 ). It s very nice! I didn t think there was another one in Colorado, except for mine.

Thread view Attachments: 0

Re: [newmellotrongroup] Re: 4000D users?

2014-04-10 by fdoddy@aol.com

I agree... When the artifacts are not there, you really notice it, though sometimes it s hard to put into words what you aren t hearing. fritz ... From: Chris

Thread view Attachments: 0

Re: [newmellotrongroup] Re: 4000D users?

2014-04-10 by fdoddy@aol.com

Haven t had them tested in a while, but my uncorrupted hearing extends to almost 20khz..no kidding. No accounting for taste though or what my wife thinks is

Thread view Attachments: 0

Re: 4000D users?

2014-04-10 by Berington Van Campen

What? HUH??? True stuff, all. I think much has to do with the fact that in a real Tron, each individual note even has its own timbre, response &

Thread view Attachments: 0

Re: [newmellotrongroup] Prog Cruise

2014-04-10 by Jay Shirley

Thanks for the report, John. RnR js ... Thanks for the report, John. RnR js On Apr 9, 2014, at 5:09 PM, John Hammaren wrote: Reporting back from æMoody Blues

Thread view Attachments: 0

RE: [newmellotrongroup] Prog Cruise

2014-04-09 by John Hammaren

Loud enough. Just some frequency bands at high dBs make we wince. And the challenges of the sound guys to make it work on a stage overlooking an empty pool,

Thread view Attachments: 0

RE: [newmellotrongroup] Prog Cruise

2014-04-09 by Gary Brumm

Randy is currently in rehearsals with a Heart Tribute act (including Heart’s original drummer) in Seattle. He puts on a great show. The first time I saw

Thread view Attachments: 0

Re: [newmellotrongroup] Prog Cruise

2014-04-09 by JAMES STRAUSS

Wow....it was that loud...? Hope that didn t detract too much. He can put on a show. http://www.youtube.com/watch?v=fNLTGgPL6V4 Nice to hear the less well

Thread view Attachments: 0

RE: [newmellotrongroup] Prog Cruise

2014-04-09 by John Hammaren

Yes, Randy Hanson was there, and as you say, he was as close as you can get. Had to do both shows outside, as it was as loud as a departing jet. Would

Thread view Attachments: 0

Re: [newmellotrongroup] Prog Cruise

2014-04-09 by JAMES STRAUSS

Thanks for the report. I picked up the advertisement/card for this cruise when I saw the MB here in my town recently. Did Randy Hansen perform? What I have

Thread view Attachments: 0

Re: [newmellotrongroup] Re: 4000D users?

2014-04-09 by <tron400@yahoo.com>

I don t think playing sounds that were sampled from a MkII through an M400 will sound like they are played through a MkII because the M400 electronics will

Thread view Attachments: 0

RE: [newmellotrongroup] Prog Cruise

2014-04-09 by John Hammaren

Reporting back from Moody Blues Cruise , in case anyone interested. Overall, a nice experience, although without the other acts, I would have been very

Thread view Attachments: 0

Re: 4000D users?

2014-04-09 by David Davis

The pre-amp emulations on the M4000D are built in - on the menus settings, you can select Chamberlin M1 or Tron MkII.

Thread view Attachments: 0

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.