MOTM

I'd be interested in finding a source for the nut and washer for the Switchcraft
jacks.  I have some cosmetically ailing jacks on some old synths that would get
quite a face-lift with new washers and nuts.  Anybody know where to find these as
well?

Eric


--- Dave Bradley <daveb@...> wrote:
> Has anyone located a source of those toothed washers that come in the MOTM
> kits for the Switchcraft jacks, but do not come with the jacks when you buy
> them in bulk from Mouser, etc?
> 
> Dave Bradley
> Principal Software Engineer
> Engineering Animation, Inc.
> daveb@...
> 
> 


__________________________________________________
Do You Yahoo!?
Send instant messages with Yahoo! Messenger.
http://im.yahoo.com/

I did not locate the exact washers Dave, but I did find good ones (a little
bigger and starred to the outside) at both my local hardware store and from
Mouser for about 6 cents each.

Here is the Mouser information for both the washer I use and extra nuts
that I use for the back side of pots (so I have two nuts on pots).  These
are only good for BACK side nuts as they are brass.

-----------------------
Extra nut for back side of pots (brass)
Mouser part # 481-0095 fig AA, M 9.5 x .75  price $0.32 page 285

Lock washer for back of switchcraft jacks (different than Paul's)
Mouser part # 481-0680 fig BB, size 10, price 5.6 cents each in quantity
100 - page 285
-----------------------

These page numbers might be out of date as a new catalog has come out since
I made my list.

Larry Hendry

----------
> From: Dave Bradley <daveb@...>
> To: MOTM List <motm@egroups.com>
> Subject: [motm] washers for Switchcraft 112A
> Date: Monday, June 19, 2000 2:49 PM
> 
> Has anyone located a source of those toothed washers that come in the
MOTM
> kits for the Switchcraft jacks, but do not come with the jacks when you
buy
> them in bulk from Mouser, etc?