MOTM

A lot of people really seem to want the delay included, as do I. Trouble is,
I also very much like the END pulse for retriggering and chaining, and I
want to keep it in 1U format. So I seem to have 1 too many things for the
panel.

Is there any way to eliminate the mode switch, yet still keep both AR and
ASR functionality?

Dave Bradley
Principal Software Engineer
Engineering Animation, Inc.
daveb@...

> Is there any way to eliminate the mode switch, yet still keep both AR and
> ASR functionality?

Use a switching stereo jack for trig/gate in, have it be ASR(gate) when
plugged in all the way and AR(trig) when pulled out by one click?

(sorry, couldn't resist)

peace,
Chris Jeris

Couldn't you place the switch horizontally below the release knob and
put the end jack where the switch was?

Dave Bradley wrote:

> From: "Dave Bradley" <daveb@...>
>
> A lot of people really seem to want the delay included, as do I.
> Trouble is,
> I also very much like the END pulse for retriggering and chaining, and
> I
> want to keep it in 1U format. So I seem to have 1 too many things for
> the
> panel.
>
> Is there any way to eliminate the mode switch, yet still keep both AR
> and
> ASR functionality?
>
> Dave Bradley
> Principal Software Engineer
> Engineering Animation, Inc.
> daveb@...


[This message contained attachments]

Another question might be, Should we include a cv attenuator for each cv
in, or is there some way the pots could act as cv attenuators when a
plus is inserted?

Dave Bradley wrote:

> From: "Dave Bradley" <daveb@...>
>
> A lot of people really seem to want the delay included, as do I.
> Trouble is,
> I also very much like the END pulse for retriggering and chaining, and
> I
> want to keep it in 1U format. So I seem to have 1 too many things for
> the
> panel.
>
> Is there any way to eliminate the mode switch, yet still keep both AR
> and
> ASR functionality?
>
> Dave Bradley
> Principal Software Engineer
> Engineering Animation, Inc.
> daveb@...


[This message contained attachments]

Why won't it just AR if a trigger (short gate) is present and ASR if a gate
holds? I must not understand it...

> -----Original Message-----
> From: Christopher Jeris [mailto:cjeris@...]
> Sent: Wednesday, February 02, 2000 4:39 PM
> To: MOTM List
> Subject: Re: [motm] VC AR - the final verdict?
>
>
> From: Christopher Jeris <cjeris@...>
>
> > Is there any way to eliminate the mode switch, yet still keep
> both AR and
> > ASR functionality?
>
> Use a switching stereo jack for trig/gate in, have it be ASR(gate) when
> plugged in all the way and AR(trig) when pulled out by one click?
>
> (sorry, couldn't resist)
>
> peace,
> Chris Jeris
>
>
> --------------------------- ONElist Sponsor ----------------------------
>
> GET A NEXTCARD VISA, in 30 seconds.  Get rates as low as 0.0 percent
> Intro or 9.9 percent Fixed APR and no hidden fees. Apply NOW.
> <a href=" http://clickme.onelist.com/ad/NextcardCreative5 ">Click Here</a>
>
> ------------------------------------------------------------------------
>
>

The mode switch is for re-triggering the EG, right? To make it act more like
an LFO than an EG? If you had that END output, couldn't it just be patched
back into the Gate input for re-triggering? Then you wouldn't need the
switch. I'm firing that off the top of my head so maybe it's not that
simple... haven't thought too deeply about it.

		-----Original Message-----
		From:	Dave Bradley [mailto:daveb@...]
		Sent:	Wednesday, February 02, 2000 5:57 PM
		To:	MOTM List
		Subject:	[motm] VC AR - the final verdict?

		Is there any way to eliminate the mode switch, yet still
keep both AR and
		ASR functionality?

A kind word, perhaps?

I was thinking that the gate coming in would have to be multipled with the
modules own "end" output, but if there's a way to make a perpetual motion
machine out of this...

:-)

		-----Original Message-----
		From:	Paul Schreiber [mailto:synth1@...]
		Sent:	Thursday, February 03, 2000 9:12 AM
		To:	motm@onelist.com
		Subject:	Re: [motm] VC AR - the final verdict?

		From: "Paul Schreiber" <synth1@...>

		And *what* gets it started? :)

And *what* gets it started? :)

Paul S.

----- Original Message -----
From: Tkacs, Ken <Ken.Tkacs@...>
To: <motm@onelist.com>
Sent: Thursday, February 03, 2000 7:37 AM
Subject: RE: [motm] VC AR - the final verdict?


> From: "Tkacs, Ken" <Ken.Tkacs@...>
>
>
> The mode switch is for re-triggering the EG, right? To make it act more
like

> an LFO than an EG? If you had that END output, couldn't it just be patched
> back into the Gate input for re-triggering? Then you wouldn't need the
> switch. I'm firing that off the top of my head so maybe it's not that
> simple... haven't thought too deeply about it.
>
>
>
> -----Original Message-----
> From: Dave Bradley [mailto:daveb@...]
> Sent: Wednesday, February 02, 2000 5:57 PM
> To: MOTM List
> Subject: [motm] VC AR - the final verdict?
>
> Is there any way to eliminate the mode switch, yet still
> keep both AR and
> ASR functionality?
>
>
>
> --------------------------- ONElist Sponsor ----------------------------
>
>       Books, music, auctions and more! Amazon.com.
> <a href=" http://clickme.onelist.com/ad/afamazon1 ">Click Here</a>
>
> ------------------------------------------------------------------------
>
>

In a message dated 2/3/2000 7:13:42 AM, synth1@... writes:

>And *what* gets it started? :)

The END output can also be described as a NOT envelope output [EG output = 0 
volts], a comparator that goes high when the envelope returns to zero. Plug 
that in to the GATE input and LFO -- my comments about not being able to 
retrigger the envelope still need to be addressed, however.

JB