Ferrite beads
2007-06-28 by Paul Schreiber
81-BL01RN1A1F1J is the Mouser part that I use. It's sort of $$$ unless you buy a big bag of them :) Paul S.
Thread
Ferrite beads
Re: [motm] Ferrite beads
2007-06-29 by Richard Brewster
It is 0.16 vs. 0.12 apiece for the part I have been buying. Not that much more. I would have bought those, if I had known the part number before. People have given three other Mouser parts: 623-2743001112 - Z=68 OHM @ 100MHz 623-2743002112 - Z=1330 OHM @ 100MHz 623-2743009112 - Z=220 OHM @ 100MHz What is the impedance of the 81-BL01RN1A1F1J? And, how important is the impedance value? -Richard Brewster http://www.pugix.com Paul Schreiber wrote:
Show quoted textHide quoted text
> 81-BL01RN1A1F1J > > is the Mouser part that I use. It's sort of $$$ unless you buy a big bag of them > :) > > Paul S. > >
Re: [motm] Ferrite beads
2007-06-29 by Paul Schreiber
Anything above 300 ohms is fine. These are 600 ohms. Paul S. ----- Original Message ----- From: "Richard Brewster" <pugix@...> To: "Paul Schreiber" <synth1@...> Cc: <motm@yahoogroups.com>
Show quoted textHide quoted text
Sent: Friday, June 29, 2007 8:57 AM Subject: Re: [motm] Ferrite beads > It is 0.16 vs. 0.12 apiece for the part I have been buying. Not that much > more. I would have bought those, if I had known the part number before. > People have given three other Mouser parts: > > 623-2743001112 - Z=68 OHM @ 100MHz > 623-2743002112 - Z=1330 OHM @ 100MHz > 623-2743009112 - Z=220 OHM @ 100MHz > > What is the impedance of the 81-BL01RN1A1F1J? And, how important is the > impedance value? > > -Richard Brewster > http://www.pugix.com > > Paul Schreiber wrote: >> 81-BL01RN1A1F1J >> >> is the Mouser part that I use. It's sort of $$$ unless you buy a big bag of >> them :) >> >> Paul S. >> >> > >
Re: [motm] Ferrite beads
2007-06-29 by groovyshaman
I ordered these a while back: 623-2743002112 - Z=1330 OHM @ 100MHz They have 'better' suppression stats and are a little bigger. George Richard Brewster wrote:
Show quoted textHide quoted text
> It is 0.16 vs. 0.12 apiece for the part I have been buying. Not that > much more. I would have bought those, if I had known the part number > before. People have given three other Mouser parts: > > 623-2743001112 - Z=68 OHM @ 100MHz > 623-2743002112 - Z=1330 OHM @ 100MHz > 623-2743009112 - Z=220 OHM @ 100MHz > > What is the impedance of the 81-BL01RN1A1F1J? And, how important is the > impedance value? > > -Richard Brewster > http://www.pugix.com > > Paul Schreiber wrote: >> 81-BL01RN1A1F1J >> >> is the Mouser part that I use. It's sort of $$$ unless you buy a big bag of them >> :) >> >> Paul S. >> >> > > > > > Yahoo! Groups Links > > > > >