MOTM

Anything above 300 ohms is fine. These are 600 ohms.

Paul S.

----- Original Message ----- 
From: "Richard Brewster" <pugix@...>
To: "Paul Schreiber" <synth1@...>
Cc: <motm@yahoogroups.com>
Sent: Friday, June 29, 2007 8:57 AM
Subject: Re: [motm] Ferrite beads


> It is 0.16 vs. 0.12 apiece for the part I have been buying.  Not that much 
> more.  I would have bought those, if I had known the part number before. 
> People have given three other Mouser parts:
>
> 623-2743001112 - Z=68 OHM @ 100MHz
> 623-2743002112 - Z=1330 OHM @ 100MHz
> 623-2743009112 - Z=220 OHM @ 100MHz
>
> What is the impedance of the 81-BL01RN1A1F1J?  And, how important is the 
> impedance value?
>
> -Richard Brewster
> http://www.pugix.com
>
> Paul Schreiber wrote:
>> 81-BL01RN1A1F1J
>>
>> is the Mouser part that I use. It's sort of $$$ unless you buy a big bag of 
>> them :)
>>
>> Paul S.
>>
>>
>
>