MOTM

> try:
>
> www.synthtech.com/pix/ph_synth3.jpg
>
> Paul S.
> no turkey yet......
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

> http://www.tellun.com/motm/diy/tln867/TLN-867.html
>
> This little piggy is on the breadboard and humming away nicely.
> Thanks to David Brown for his A440 tone generator that was the
> starting point for this utility. It went from a single jack utility
> to a 4-jack, 2-knob, 2-switch, 4-LED monster in just two days.
>
>

--- In motm@yahoogroups.com, Scott Juskiw <scott@...> wrote:
>
> It's -25 outside at the moment, and it's only going to get colder
> over the next few days, and the snow isn't supposed to stop until
> June. This makes a good reason to stay inside all weekend and work on
> MOTM!
>
> I've posted some info about the new MUUB-3 board along with an
> updated MUUB user guide:
>
> http://www.tellun.com/motm/diy/muub/muub.html
>
> If you're wondering what you can do with a MUUB-3, I've also posted
> some preliminary information about my latest MUUB-based utility
> module:
>
> http://www.tellun.com/motm/diy/tln867/TLN-867.html
>
> This little piggy is on the breadboard and humming away nicely.
> Thanks to David Brown for his A440 tone generator that was the
> starting point for this utility. It went from a single jack utility
> to a 4-jack, 2-knob, 2-switch, 4-LED monster in just two days.
>
> The only thing stopping me from finishing it this weekend is the lack
> of a prototype panel and the table saw that is out in the garage at
> -25. It's a bad idea handling metal at -25, trust me. I might have to
> wait until June.
>