MOTM

It's -25 outside at the moment, and it's only going to get colder 
over the next few days, and the snow isn't supposed to stop until 
June. This makes a good reason to stay inside all weekend and work on 
MOTM!

I've posted some info about the new MUUB-3 board along with an 
updated MUUB user guide:

http://www.tellun.com/motm/diy/muub/muub.html

If you're wondering what you can do with a MUUB-3, I've also posted 
some preliminary information about my latest MUUB-based utility 
module:

http://www.tellun.com/motm/diy/tln867/TLN-867.html

This little piggy is on the breadboard and humming away nicely. 
Thanks to David Brown for his A440 tone generator that was the 
starting point for this utility. It went from a single jack utility 
to a 4-jack, 2-knob, 2-switch, 4-LED monster in just two days.

The only thing stopping me from finishing it this weekend is the lack 
of a prototype panel and the table saw that is out in the garage at 
-25. It's a bad idea handling metal at -25, trust me. I might have to 
wait until June.