MOTM

Three things to clear up. The 700 is gone. Sorry to all who have been asking about it. Next, the Blacet modules are in Blacet format except for audio on the DSC and Time Machine which are ¼ inch SwitchCraft. The power wire/cords for the Blacet are wired for the MOTM power distro board too.

Thanks

Had one person back out of the last sale. Also found some kits that haven\u2019t been put together that I need to sell.

1 MOTM-410 Triple Resonant filter that has been modified with a switch on the front panel to switch from use with other modules to use with external instruments. There\u2019s an option on the board for this but it only uses a resistor but I used a switch so I could use it with modules and external gear. $225

1 MOTM-101 Noise/S+H $150

1 MOTM-110 RingMod/VCA $175

1 MOTM-700 Dual VC Router $140

1 Time Machine in Blacet Format with ¼ inch Switchcraft for the audio in/out $275

1 MiniWave Blacet format $180

1 Dark Star Chaos which I don\u2019t know how much they are anymore so a reasonable offer

All assembled by me and working perfectly. USA only. Priority goes to people who want multiple items.

------------------------------------------------------------------------------------------------------------------------------------------------------------

The rest are kits with instructions and everything you usually get from Paul.

1 MOTM 110 $100

1 MOTM-380 Quad LFO $125

1 MOTM 390 Dual LFO $110

1 MOTM 490 Moog LPVCF $160

1 MOTM 820 VCLagProcessor $190

1 MOTM 890 MicroMixer $110

All are KITS. USA only. Again priority goes to person who wants multiple items.

Thanks

Joe Bruno

Joe.Bruno@...

1780 Executive Drive

PO Box 84

Oconomowoc WI 53066

www.bruno.com