MOTM

I have a motm 940 patch panel and want to connect my motm system with 
my modcan, cyndustries and serge systems via the 940. Where and how to 
ground which system? Sorry for this stupid question...but what really 
confuses me is that the synthesizers.com q121 banana jack interface 
does NOT have any ground...

Thanks a lot in advance

The Serge provides the ground out the back of the power supplies.  Connect
that to any black ground jack on the 940.  You only need one connection.
They are all wired together on the 940.

I don't know where modcan/Cyndustries have the ground jack, but guess it is
on the power supply as well.

All banana jack synths being shared across patches should also have their
grounds connected together.  

John Loffink
The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com
The Wavemakers Synthesizer Web Site
http://www.wavemakers-synth.com

> -----Original Message-----
> From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of
> fhserge
> Sent: Sunday, January 22, 2006 4:47 PM
> To: motm@yahoogroups.com
> Subject: [motm] How to connect to banana systems
> 
> I have a motm 940 patch panel and want to connect my motm system with
> my modcan, cyndustries and serge systems via the 940. Where and how to
> ground which system? Sorry for this stupid question...but what really
> confuses me is that the synthesizers.com q121 banana jack interface
> does NOT have any ground...
> 
> Thanks a lot in advance
> 
>