Yahoo Groups archive
Thread
2005-05-12 by ben vehorn
What is the name of the wire that is used in the MOTM mult panels? I'm about to order from Mouser and want to grab some of this stuff. I scored a bunch of Switchcraft 1/4" jacks and am making some mult panels... currently using insulated wire but it would be nice to be able to thread it through a bunch of jacks at once without doing any stripping/prep. Thanks. ---Ben
2005-05-12 by John Loffink
Bus wire. This is what I used: Bus Wire, 22 ga, 100 feet Mouser 602-299-100 $9.3700 John Loffink The Microtonal Synthesis Web Site http://www.microtonal-synthesis.com The Wavemakers Synthesizer Web Site http://www.wavemakers-synth.com
> -----Original Message----- > From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of ben > vehorn > Sent: Wednesday, May 11, 2005 7:22 PM > To: motm@yahoogroups.com > Subject: [motm] making some mults... > > What is the name of the wire that is used in the MOTM mult panels? I'm > about to order from Mouser and want to grab some of this stuff. > I scored a bunch of Switchcraft 1/4" jacks and am making some mult > panels... currently using insulated wire but it would be nice to be > able to thread it through a bunch of jacks at once without doing any > stripping/prep. > Thanks. > ---Ben >
2005-05-12 by ben vehorn
Ahh... that's it. Thanks, this will be a big help.
On May 11, 2005, at 11:03 PM, John Loffink wrote: > Bus wire. This is what I used: > > Bus Wire, 22 ga, 100 feet Mouser 602-299-100 > $9.3700 > > John Loffink > The Microtonal Synthesis Web Site > http://www.microtonal-synthesis.com > The Wavemakers Synthesizer Web Site > http://www.wavemakers-synth.com > > > > -----Original Message----- > > From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf > Of ben > > vehorn > > Sent: Wednesday, May 11, 2005 7:22 PM > > To: motm@yahoogroups.com > > Subject: [motm] making some mults... > > > > What is the name of the wire that is used in the MOTM mult panels? > I'm > > about to order from Mouser and want to grab some of this stuff. > > I scored a bunch of Switchcraft 1/4" jacks and am making some mult > > panels... currently using insulated wire but it would be nice to be > > able to thread it through a bunch of jacks at once without doing any > > stripping/prep. > > Thanks. > > ---Ben > > > > > > Yahoo! Groups Links > • To visit your group on the web, go to: > http://groups.yahoo.com/group/motm/ > > • To unsubscribe from this group, send an email to: > motm-unsubscribe@yahoogroups.com > > • Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service. >