MOTM

I needed a supply for my new wood upper cabinet for AHMW this weekend. So, I
whipped up the 2U high prototype we have been discussing for SKB pop up
cases.  For your entertainment:
http://www.wiseguysynth.com/larry/power.htm

Stooge Larry

> http://www.wiseguysynth.com/larry/power.htm

so this is going to be available as a stooge panel/kit when? :) one
suggestion... it might be good to have the "additional cabinet" cable come
out the *back* of the powersupply, since it will be going into the back of
a second skb. i also like having the powercord come out the rear... very
nice work, larry...

bleep.
out.

---
www.mp3.com/leichenfeld
www.mp3.com/captainhotrod
www.mp3.com/silenttristero

> I guess I had envisioned that the interconnecting power cable
> would connect in the front, with a receiver on the other end like this
> http://www.wiseguysynth.com/larry/paul/back.jpg,


As an alternative, I've built two "Ammo Box" power supplies for my system,
and used locking DIN connectors on the Ammo Box and on the synth case. Been
working great for me...


Les Mizzell

- - - - - - - - - - - - - - - -
"Did you ever walk into a room
and forget why you walked in?
I think that's how dogs spend
their lives." -- Sue Murphy
- - - - - - - - - - - - - - - -

> also, i like les's "ammo box" idea... do you have any pics of that up,
> les?


Soon, soon.....along with the "minifridge" that I ended up with for a case!
At least, that's what it looks like when the lids are on and it's ready to
go somewhere...


Heh...


Les Mizzell

- - - - - - - - - - - - - - - -
"Did you ever walk into a room
and forget why you walked in?
I think that's how dogs spend
their lives." -- Sue Murphy
- - - - - - - - - - - - - - - -

> I guess I had envisioned that the interconnecting power cable would connect
> in the front, with a receiver on the other end like this

that would be fine, actually. i'm assuming that no interference would be
caused if patch cables overlapped it?

> No, There are currently no plans to make this available as a Stooge panel.
> I'm not saying we would not, but I the concept to make a prototype like this
> was originally proposed to me by Paul.  Perhaps he plans to release the MOTM

i've been hearing *that* for like a year and a half. :) paul's got his
hands full with the u-series and the 500 series and running the business
in general, so i don't expect this ps is a priority.

> I could whip some of these up by hand, but, I would look for a nice power
> switch that fits in a round hole. Cutting the rectangular hole in this steel
> was a royal pain.

oooh! a big light-up button! heh...

also, i like les's "ammo box" idea... do you have any pics of that up,
les?

bleep.
out.

---
www.mp3.com/leichenfeld
www.mp3.com/captainhotrod
www.mp3.com/silenttristero

Looks cool! I did 1U one about a year ago, and it was nice to get the
3U width back for more modules.

Bruce

--- In motm@y..., "J. Larry Hendry" <jlarryh@i...> wrote:
> I needed a supply for my new wood upper cabinet for AHMW this
weekend. So, I

> whipped up the 2U high prototype we have been discussing for SKB pop up
> cases.  For your entertainment:
> http://www.wiseguysynth.com/larry/power.htm
> 
> Stooge Larry

I guess I had envisioned that the interconnecting power cable would connect
in the front, with a receiver on the other end like this
http://www.wiseguysynth.com/larry/paul/back.jpg, or on some other 2U high
19" panel with other stuff on it. Tell me more about how you connect to the
back on the receiving end.

No, There are currently no plans to make this available as a Stooge panel.
I'm not saying we would not, but I the concept to make a prototype like this
was originally proposed to me by Paul.  Perhaps he plans to release the MOTM
power supply in this format.  Paul?  If not, and if there is sufficient
interest, perhaps a Stooge retro panel could be considered.  Interest
expressed to me so far in the SKB pop-up back I prototyped has been very
low. (I'm still waiting on the quote BTW).

I could whip some of these up by hand, but, I would look for a nice power
switch that fits in a round hole. Cutting the rectangular hole in this steel
was a royal pain.

The white connecting wire may not look large enough in the photos, but it
is.  It is special utility grade wire.  That is actually # 14 inside there.

Larry

----- Original Message -----
From: blip <bleep@...>

> http://www.wiseguysynth.com/larry/power.htm

so this is going to be available as a stooge panel/kit when? :) one
suggestion... it might be good to have the "additional cabinet" cable come
out the *back* of the powersupply, since it will be going into the back of
a second skb. i also like having the powercord come out the rear... very
nice work, larry...

bleep.
out.