MOTM

I am running the + out from my EG into my VCA and - out into FM1 of my 420
and everything works fine.  I don't have any way to reverse the polarity of
the - out, so I ran the + out into the mult and then took two signals from
there.  No good!  Neither the VCA nor the filter respond to the EG when it
is set up like this.

What gives???

Thanks!
Shemp

What mult? The '910 or '940?

It should work fine, unless you plugged into the '910s splitter jack.

Paul S.

----- Original Message -----
From: "Tentochi" <tentochi@...>
To: "MOTM Mailing List" <motm@yahoogroups.com>
Sent: Saturday, February 17, 2001 12:54 AM
Subject: [motm] EG question/problem


> I am running the + out from my EG into my VCA and - out into FM1 of my 420
> and everything works fine.  I don't have any way to reverse the polarity
of

> the - out, so I ran the + out into the mult and then took two signals from
> there.  No good!  Neither the VCA nor the filter respond to the EG when it
> is set up like this.
>
> What gives???
>
> Thanks!
> Shemp
>
>
>
>
>

Have the 940's even shipped yet...?

-----Original Message-----
From:	Paul Schreiber
To:	motm@yahoogroups.com
Sent:	2/17/01 10:24 AM
Subject:	Re: [motm] EG question/problem

What mult? The '910 or '940?
It should work fine, unless you plugged into the '910s splitter jack.
Paul S.
----- Original Message -----
From:	"Tentochi" <tentochi@...>
To:	"MOTM Mailing List" <motm@yahoogroups.com>
Sent:	Saturday, February 17, 2001 12:54 AM
Subject:	[motm] EG question/problem


> I am running the + out from my EG into my VCA and - out into FM1 of my
420
> and everything works fine.  I don't have any way to reverse the
polarity
of
> the - out, so I ran the + out into the mult and then took two signals
from
> there.  No good!  Neither the VCA nor the filter respond to the EG
when it

> is set up like this.
>
> What gives???
>
> Thanks!
> Shemp
>
>
>
>
>

>  
> Have the 940's even shipped yet...?
> 

Err...since last year :)

And I have 37 MOTM-910s boxed up, ready to ship at a moments notice.

Paul S.

I have had my '910 for about a month or so.  Perhaps a bit longer.  There
are on the web page now too under New.

Their power consumption ratings are extremely low.  They make incredible
noises--especially from the 10th floor up.

My only complaint is that the line thickness is a little heavier than the
other modules and the arrows seem a bit bulky.

YOUR BASE ARE BELONG TO US!

--Shemp

> -----Original Message-----
> From: Tkacs, Ken [mailto:ken.tkacs@...]
> Sent: Tuesday, February 20, 2001 9:05 AM
> To: 'motm@yahoogroups.com'
> Subject: [motm] EG question/problem
>
>
>
>
> Have the 940's even shipped yet...?
>
> -----Original Message-----
> From:	Paul Schreiber
> To:	motm@yahoogroups.com
> Sent:	2/17/01 10:24 AM
> Subject:	Re: [motm] EG question/problem
>
> What mult? The '910 or '940?
> It should work fine, unless you plugged into the '910s splitter jack.
> Paul S.
> ----- Original Message -----
> From:	"Tentochi" <tentochi@...>
> To:	"MOTM Mailing List" <motm@yahoogroups.com>
> Sent:	Saturday, February 17, 2001 12:54 AM
> Subject:	[motm] EG question/problem
>
>
> > I am running the + out from my EG into my VCA and - out into FM1 of my
> 420
> > and everything works fine.  I don't have any way to reverse the
> polarity
> of
> > the - out, so I ran the + out into the mult and then took two signals
> from
> > there.  No good!  Neither the VCA nor the filter respond to the EG
> when it
> > is set up like this.
> >
> > What gives???
> >
> > Thanks!
> > Shemp
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
>