MOTM

I have had my '910 for about a month or so.  Perhaps a bit longer.  There
are on the web page now too under New.

Their power consumption ratings are extremely low.  They make incredible
noises--especially from the 10th floor up.

My only complaint is that the line thickness is a little heavier than the
other modules and the arrows seem a bit bulky.

YOUR BASE ARE BELONG TO US!

--Shemp

> -----Original Message-----
> From: Tkacs, Ken [mailto:ken.tkacs@...]
> Sent: Tuesday, February 20, 2001 9:05 AM
> To: 'motm@yahoogroups.com'
> Subject: [motm] EG question/problem
>
>
>
>
> Have the 940's even shipped yet...?
>
> -----Original Message-----
> From:	Paul Schreiber
> To:	motm@yahoogroups.com
> Sent:	2/17/01 10:24 AM
> Subject:	Re: [motm] EG question/problem
>
> What mult? The '910 or '940?
> It should work fine, unless you plugged into the '910s splitter jack.
> Paul S.
> ----- Original Message -----
> From:	"Tentochi" <tentochi@...>
> To:	"MOTM Mailing List" <motm@yahoogroups.com>
> Sent:	Saturday, February 17, 2001 12:54 AM
> Subject:	[motm] EG question/problem
>
>
> > I am running the + out from my EG into my VCA and - out into FM1 of my
> 420
> > and everything works fine.  I don't have any way to reverse the
> polarity
> of
> > the - out, so I ran the + out into the mult and then took two signals
> from
> > there.  No good!  Neither the VCA nor the filter respond to the EG
> when it
> > is set up like this.
> >
> > What gives???
> >
> > Thanks!
> > Shemp
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
>