MOTM

Could be do a group buy on these if indeed they will work ? Probally could save
some dough.
Jim

bigd@... wrote:

> have you ever felt like your gonna explode from eating  : )
>
> I was wondering if these can be used with the MOTM rails, as i dont think there
> enough room from your photo's Larry to use them on 4 or 5 modules on the MOTM
> rails, would like if it would.
> Jim
>
> J. Larry Hendry wrote:
>
> > Some of you have been looking for metal edges that are an exact fit to slip
> > over the edge of your MOTM modules for that "Moog edge" look.  Well, I have
> > found something that suits that need.  See the attached photos.  These are a
> > perfect slip fit over the standard MOTM panel and are just tight enough not
> > to scratch the paint.  My only reservation is that the thickness of the
> > brass metal (need to paint white), times two will be too thick to fit
> > between the allowed gap Paul has provided.  I have come to the conclusion
> > that any metal thin enough to meet that need would just be too thin to be
> > worth having for this function.  So, if you select this option, you will
> > need to take that into consideration.
> >
> > If you are interested in getting some of this for your own experiments:
> >
> > Micro-mark  1-800-225-1066
> > or www.micromark.com
> >
> > Part # 60254   - 8 pieces to a pack for $7.60
> > Size = 1/8" walls - 5/32" inside space - 0.14" metal thickness - 12" long
> >
> >
> >   ------------------------------------------------------------------------
> >
> >                     Name: edge02.jpg
> >    edge02.jpg       Type: JPEG Image (image/jpeg)
> >                 Encoding: base64
> >
> >                     Name: edge03.jpg
> >    edge03.jpg       Type: JPEG Image (image/jpeg)
> >                 Encoding: base64
>