MOTM

Looking at my 320s the Tempco seems to have pretty good contact with the 
IC's although it is near the base of the enclosure.  Paul always has a good 
reason when one of the instructions is in bold,  and perhaps he will 
enlighten us when he returns from his vacation.

-dave-

At 01:42 AM 12/25/00 -0500, you wrote:
>On the 320 LFO, the tempco resistor is supposed to touch Q1 and Q2, yet the
>instructions say in bold face to be sure that the tempco resistor is "all the
>way flat on the pc board surface".  It would make far better contact with Q1
>and Q2 if left about 1/10 of an inch above the pc board.  Is it more
>important that it sits flat on the pc board then make good contact with Q1
>and Q2?