MOTM

I think it's more like 26 if you use the average module requirement of 20 
ma and Paul's safety factor of not using more than 65% to keep power supply 
heat down.  Those of us who have installed Dave Bradley's mod for LED's for 
the 800's have to tag on another 5 to 10 ma per LED I believe.  I'm using 
22 as max on my setup (lots of extra LED's:)

-dave-

At 01:22 PM 12/17/00 -0500, you wrote:
>And being a big ass, I can add to Jeff's points too. My plan is to build a
>cabinet of three rows by 24U wide which will probably have about 40 modules
>requiring power when it's finished (I will be using two of the legendary 12U
>flat cabinet rails). I am using a 1.5A supply, and I think that will be more
>than enough for the 40 modules (didn't Paul say that the 900's 0.8A supply
>would be enough for 40 modules?). So I'd imagine 20 output connectors per
>block would be enough since the larger cabinets could just use two of these.