MOTM

In-Reply-To: <002501c05f63$8ce9afa0$5e1ca6c3@pavilion>
Hi Paul,

I already have the correct MTA connectors, its the correct cable I was after

many thanks for your trouble anyhow


Keith

http://home.freeuk.net/lowpass



> hello,
> 
> i have them here, i had a minor problem not being able to get the correct
> wire guage, but:
> 
> 0.156" four way housing - 588-910 (24awg)
> 0.156" four way header - 589-068 (24 awg / friction lock straight)
> 0.156" four way dust cover - 589-019
> 0.1" four way dust cover - 588-350
> 0.1" four way header - 588-593 (24awg / friction lock straight) - the bit on
> the board
> 0.1" four way housing - 588-179 (24awg) - the bit on the cable
> 
> the 0.1" sizes are used on the earlier Oakley modules, sorry i don't have
> any sizes. important - please check when ordering that i've not dropped a
> digit here, i'd hate to have you ordering something bizarre
> i'd also highly recommend getting some kind of impact tool to assemble
> these, a tenner spent is well worth keeping all your fingers intact...