MOTM

Yes, it's EXACTLY the same size as MOTM gear. It even uses the same
connectors, and has the 1/4" jacks in the same locations.

Tony



-----Original Message-----
From: weld@... [mailto:weld@...]
Sent: Wednesday, November 22, 2000 11:14 AM
To: motm@egroups.com
Subject: Re: [motm] new list member with 2 module suggestions


ooooooooohhh
thank you~!

what are the dimensions on that ?
Will it fit in pauls rails ?
Jim

Tony Karavidas wrote:

> Sorry I've been so quiet lately... (Really, REALLY busy right now)
>
> The UEG does have a looping function.
>
> See http://www.encoreelectronics.com/motm/ENVGEN5a.jpg for a final
version.
> The sheet metal is being silkscreened this week and should be back next
> week. Parts are still coming in, but this *should* be shipping just before
> Xmas.
>
> Tony
>
> -----Original Message-----
> From: improv@... [mailto:improv@...]
> Sent: Tuesday, November 21, 2000 1:17 PM
> To: motm@egroups.com
> Subject: Re: [motm] new list member with 2 module suggestions
>
> >Hello all,
> >          I've just signed up in the last few days (should have done it
> >ages ago...) I have a small MOTM setup (2x VCO, 1x 440 VCF, 2x ADSR, 1x
> >VCA/RM, 1x sub harmonic mux, 1x patch panel) - feel free to laugh @ my
> >pitiful synth-power inadequacy ;) - I also have a rack w/4 blacet
> >modules (DS, TM, FD & KW) as well as a couple of modcan modules, a Serge
> >panel and a wiard "borg" filter. I've got a triple resonator on order
> >from MOTM right now :)   All great stuff, and I feel lucky to live in
> >such times....
>
> Geez, doesn't sound like inadequacy to me! Welcome to the list!
>
> >2/ transient generator like on EMS VCS3.  This is a VERY useful little
> >CV generator.  Controls are Attack, Hold, Decay, and Repeat (this last
> >one retriggers the whole thing at varying rates.  I figure an MOTM
> >version could have the first three controls, trigger in, + and - CV outs
> >(like MOTM ADSR) "squared up" out, "end trigger" out (plug it into
> >trigger in and it retriggers itself) and possibly CV in...better still
> >if all this could be squeezed into 1u!  This module would be able to
> >perform the following functions depending on how it was patched:
> >
> Doesn't the planned Encore UEG have a re-trigger/looping function? I'm not
> remeberring the details, but I do remember that concept was floated when
> Tony was asking for ideas.
>
> >AHR envelope
>
> Tony Allgood's Oakley Dual AD/AR offers this. I'm just about to drill the
> panel and mount a pair of these, wish me luck.
>
> ____________________________________________
> Dave Trenkel : improv@...
> Minus Web Site: http://listen.to/minusmusic
> Minus MP3's: http://www.mp3.com/-minus-
> ____________________________________________
>