MOTM

> From: "David Bivins" <david@...>
>
> I guess I caught a bit of this discussion among a couple of you "post

many

> times daily" types, but is anyone putting anything *between* the modules
> and/or on the far left and right sides where the modules don't actually

meet

> the edges of whatever case you're using? I seem to recall that someone

was

> looking for aluminum piping... I assume this is in pursuit of the Moog

look?

David,
Some of us have discussed the aluminum between teh modules for that Moog
look, but have yet to find anything exactly suitable. The closest thing I
found was nickel-silver HO train track rail and I didn't like the way it
had to be "modified." So, I will likely give up onm the idea unless
someone else comes up with somethign really cool.

As far as the right and left sides, I did close mine up. I made these end
caps very cheaply with only a metal cutting blade for my saw, a drill and a
little time. I used commonly available aluminum project bar 3/4" wide and
1/8" thick from my local hardware store. I did not paint them as I could
not match that beautiful MOTM finish. Instead I leaft them with a
"brushed" aluminim look. E-mail me privately and I will send you a photo
in .jpg format if you are interested in seeing my end caps. I think I
made 9 sets for about $11.00

Larry Hendry