Just to clarify a few things ... The Wiard Mini-Wave and Joyrider modules both used the circuit boards from modules in the "regular" Wiard series - Waveform City and Borg Filter, respectively, both of which are still available. The boards on the "mini" modules, however, are not fully populated - the Mini-Wave lacks the analog oscillator, EG & VCA from Waveform City and the Joyrider doesn't have the two VCO's from the Borg Filter module. However, both "mini" modules DID have neat features that weren't implemented in the corresponding "regular" modules - the Mini-Wave has a CV input to sweep through the banks (the Waveform City only has a CV input to sweep through the waves in one bank, but not a CV input to sweep through *all* the banks in the wavetable), and the Joyrider has a push-pull switch to change the filter configuration between serial and parallel (obviously, this could be done with patchcords on the Borg module, but would require additional hardware for the instantaneous switching). In general, the "regular" modules have vastly superior panel graphics/screening (especially the newer Borg Filter), as long as the bright blue and crypto-celtic designs don't bug you (I'm only worrying about whether they'll clash with the Andromeda when I get one). They also tend to have more patchpoints/connections/controls (with the exceptions I mentioned above) - for instance the Joyrider has a single Q knob that sets resonance to the same level for both filters, while the Borg has a separate Q knob for each filter. And finally, although the Borg Filter is modeled partly on the MS-20 filter, the MOTM-420 is NOT an exact substitute (or vice versa). The Borg uses Vactrols (despite the acronym, it's more 3/4-Buchla, 1/4-Korg, than vice-versa), which give it a bit of a woody/natural sound that's pretty unique for all the filters I've tried (it can still get pretty harsh, but not quite as screamingly so as a -420 or original MS-20). And despite the common use of Vactrols, it doesn't sound like the MOTM-410, either (duh! it's not triple bandpass). All 3 definitely have their own unique characteristics (as do the MOTM-440, "regular" Wiard multimode filter, Blacet Final Filtre, etc. - I love 'em all!). Anyway, I hope that John is able to make these available to the public again (especially since I missed out on the Mini-Wave!). I know that Grant (mr. Wiard) is prototyping 50-kazillion different concepts these days (so we're pretty lucky that he took the time out to make small runs of the 1200-series "mini" modules), and the next addition to his regular module series sounds pretty exciting, if not necessarily conducive to a "live" synth rig ... -Doug ceres@... ceres[at]sirius.com P.S. Try these links, even though they're no longer "real": http://www.wiard.com/Grants%201200/MiniWave/MiniManual.html http://www.wiard.com/Grants%201200/JoyRider/Joy%20Rider%20Manual.html http://www.wiard.com/Grants%201200/Joystick/1209.htm
Message
RE: Wiard Mini-Wave info?
2000-11-07 by Doug Pearson
Attachments
- No local attachments were found for this message.