MOTM

From: Tkacs, Ken <ken.tkacs@...>
> Question--do you find the 10" depth "stable"? I was going to take
advantage
> of the shallow depth of the MOTM modules and keep depth to an absolute
> minimum (maybe 8" outside measurement), but I worry that I will plug a
patch
> cord in and push the whole thing over. Is this a silly worry? Even with
> rubber feet? That's an open question to any of you cabinet guys / Moog
> owners.

hello all (again)

my cabinet is double module depth, with power supply at rear) - it must be
around 12" deep (including patent "Oakley Lip" to protect pots in case of
dire emergency in transit). i haven't had a problem with cabinet movement
even with a three row high system - i think the secret is weight, what with
10mm MDF on an aluminium frame, the bugger has too much inertia, also a good
sturdy set of rubber feet helps

oh yes, and if you put the VCOs at the bottom and EGs at the top it keeps
the centre of gravity down :-)

cheers
paul b