MOTM

On Sat, 19 Aug 2000, Microtonal wrote:

> If /1 is not available from the /N output then this can still be
> accomplished assuming the /N output has a suitable range, say from /2
> to /32.  That would give a range from 16th notes to whole notes with
> clocks at 32nd note rates going to the clock input of the VC divider.

  That switch that says full cycle/half cycle; it selects whether to
advance the internal counter on the rising edge or both edges of the input
clock.  This being the case (and tested to Pluto and back), you get two
mode of operation:

  Full-cycle: N can be any integer from 2 to 33

  Half-cycle: N can be from 1.0 to16.5 in 0.5 steps

Crow

/**/