MOTM

I was thinking of the application where a VC Divider has it's VC input come
from the row of a sequencer and the /N output goes to the clock input of the
sequencer.  The row sets the duration of each step in the sequence.  Using a
Y-cord or multiple won't help in this instance as the rate is constantly
changing.  The benefits of clocking a sequencer this way as opposed to using
a VC clock or LFO are:

1.  Sequencers can be synced to each other using multiple VC dividers and a
common clock, and note durations for each can be varied.
2.  Sequencers can be synced to MIDI.
3.  Sequencers can by synced to tape.

If /1 is not available from the /N output then this can still be
accomplished assuming the /N output has a suitable range, say from /2 to
/32.  That would give a range from 16th notes to whole notes with clocks at
32nd note rates going to the clock input of the VC divider.

John Loffink
microtonal@...


----- Original Message -----
From: "Paul Schreiber" <synth1@...>
To: <motm@egroups.com>
Sent: Saturday, August 19, 2000 9:12 PM
Subject: Re: [motm] Food for thought


> Divide by 1 = Y-cord or multiple :)
>
> It does divide by 2 to 9, then a seperate /16. All simultameously
available.
> It can also
> "half divide" by 1.5, 2.5, 3.5, etc.
>
> Paul S.
>
> ----- Original Message -----
> From: "Microtonal" <microtonal@...>
> To: <motm@egroups.com>
> Sent: Saturday, August 19, 2000 3:57 PM
> Subject: Re: [motm] Food for thought
>
>
> > Does the VC Rate Divider do a divide by 1 from the /N output?  This is
> very
> > useful if you're feeding it a pulse rate that's sixteenth notes.  Then
you
> > just divide by 1 to get a sixteenth note, by 2 to get an eighth, etc.
> It's
> > possible to set the input rate to twice your needed note rate, but it's
> just
> > not quite as intuitive.
> >
> > John Loffink
> > microtonal@...
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> 
>
>
>
>