MOTM

Another thing to check is R10 and R11.  If these are not the same size,
that could skew the center point of VR1.  Larry H

> From: "Paul Schreiber" <synth1@...>
> 12:0 (up) is ground. Install a jumper wire from the
> beveled lug (ground) to the top lug of the CV IN
> jack. I bet that does the trick!
> 
> Paul S.
> 
> ----- Original Message -----
> From: Tkacs, Ken <ken.tkacs@...>
>
> I have a question regarding my MOTM-700 Router's
> operation. The whole module seems to "work." The
> strange thing about mine is that, with nothing plugged
> into it, the upper half seems to switch at about -1.9,
> whereas the bottom half switches at 12:00 exactly.