MOTM

Out of the sync24? Not on my 606 and 303--the clock pin (the center one I
think) reads 5V coming out...

Also, the Jomox XBase09 sync24 output is 5V, and that's rock solid for me
too.

I assume that that's what you were asking about Paul, the sync24,
confusingly called "dinsync" sometimes... 'cause there aren't other clock
inputs on these smaller devices (unlike the clock inputs in a lot of the
keyboard synths, SH-101, etc.).

> -----Original Message-----
> From: Paul Schreiber [mailto:synth1@...]
> Sent: Friday, March 10, 2000 6:16 AM
> To: motm@onelist.com
> Subject: Re: [motm] Pulse Divider
>
>
> From: "Paul Schreiber" <synth1@...>
>
> It appears that going IN to drum machines, a +5V level is OK. Coming OUT,
> they use like +12V.
>
> Paul S.
>
> ----- Original Message -----
> From: <elhardt@...>
> To: <motm@onelist.com>
> Sent: Friday, March 10, 2000 12:51 AM
> Subject: Re: [motm] Pulse Divider
>
>
> > From: elhardt@...
> >
> > synth1@... writes:
> >
> > >>This is the *plan*. However, I need thouse of you with Roland
> drum stuff
> >  (303/808/505/606/blah blah)
> >  to look in the manuals and see if Roland states what they
> expect CLOCK IN
> to
> >  be. If is a higher voltage, I'll have to buffer things differently.<<
> >
> > I didn't see anybody answer this, and none of my Roland manuals (TR-808,
> > MC-4) seem to specify what the DIN input sync socket takes.  For
> > Gate/Trigger/MPX OUTPUTS though, Roland seems to be going with 12 to 15
> > volts.  However for the external sync 1/8" connector and Gate inputs on
> the
> > Roland MC-4 sequencer, they specify a threshold of 2.5 volts to trigger.
> > Don't know if this helps.
> >
> > -Elhardt
> >
> >
>
>
> ------------------------------------------------------------------------
> GET A NEXTCARD VISA, in 30 seconds!  Get rates as low as 0.0%
> Intro or 9.9% Fixed APR and no hidden fees.  Apply NOW!
> http://click.egroups.com/1/937/2/_/529958/_/952694032/
> ------------------------------------------------------------------------
>
>