MOTM

Err...read the manual :)

Cross mode requires TWO inputs, IN A and IN B.

Paul S.

----- Original Message -----
From: <telepath@...>
To: <motm@onelist.com>
Sent: Wednesday, March 01, 2000 8:47 AM
Subject: [motm] MOTM-120 Troubleshooting


> From: telepath@...
>
> Finished putting together my first MOTM module, the 120 Sub-Octave
> Multiplexer and power supply.
>
> Input A works fine, no problems.
>
> Input B doesn't seem to work in Cross Mode.  I've checked the wires to the
> jack and there is continuity to the board.
>
> Since Input B doesn't work when in Cross Mode I'm wondering if anyone has
> any advice on further troubleshooting this problem.
>
> Telepathic regards,
> fRED
>
>
>
> ------------------------------------------------------------------------
> GET A NEXTCARD VISA, in 30 seconds!  Get rates as low as 2.9%
> Intro or 9.9% Fixed APR and no hidden fees.  Apply NOW!
> http://click.egroups.com/1/915/2/_/529958/_/951921972/
> ------------------------------------------------------------------------
>
>