MOTM

> From: Dave Bradley <daveb@...>
> 
>--- snip out 4 very good an interesting points on normalling ---<
> 
> Aw, screw it. Here's an alternative: Under each row of 
> modules, run a Larry's Magic Buss(tm) strip. Divide it up
> into groups of 4 jacks such that some groups are a simple
> mult, some output 4 gate signals from your converter,
> some output 4 kbd CV signals from your convertor, etc.
> Wire this all up such that the gate outputs happen to be
> just under your 800s, the kbd CVs are available just under
> your 300s and 420s, etc. Now all you need is a 6" patchcord
> to run your common hookups, you don't have to unplug them,
> they are out of the way, and you don't have the
> unsoldering/alternate connection system hassles of true
> normalling when you remove modules.

Again, I agree with Dave <snicker>

LH