MOTM

I don't think it would do what you want - make the splitter cable (or use a
mult).

The EG wants a signal that goes high to turn the gate on and goes low to
turn it off.  An audio signal would bounce all over the place.  I don't know
what the fastest rate the EG can accept a Gate, but it certainly doesn't
want audio, but it could be interesting to try ;)

I believe the EG wants 0V and +5V gate signals.  The headphone out is likely
to be +/- 6V AC.

	Eric

> -----Original Message-----
> From: velure [mailto:velure@...]
> Sent: Wednesday, February 09, 2000 4:43 PM
> To: motm@onelist.com
> Subject: [motm] patching
> 
> 
> From: "velure" <velure@...>
> 
> here's a question for the group.  i have not tried this yet, 
> but really want
> feed the headphoneAUDIO output from my 303 into the GATE 
> INPUT of my EG 800.
> i am using the cv/gate out of the 303 to sequence the 101.  i 
> guess i could
> create a splitter cable, but, I AM LAZY.
> 
> what would happen if i did this?  would it retrigger the EG?
> 
> silly steve
> 
> 
> --------------------------- ONElist Sponsor 
> ----------------------------
> 
> $10 Savings on Pet Valentine Gifts. 
> Looking for that pet-perfect Valentines Day gift?
> Click here for $10 off purchases of $25 or more. 
> <a href=" http://clickme.onelist.com/ad/NewPetopia2 ">Click Here</a>
> 
> --------------------------------------------------------------
> ----------
> 
>