Drag out that MS-20. They are drawing $1000 + on E-bay. I think mine might be headed that way. Larry H ---------- > From: Hugo Haesaert <hugo.haesaert@...> > To: motm@onelist.com > Subject: RE: [motm] EG-mania > Date: Friday, February 04, 2000 11:40 AM > > From: "Hugo Haesaert" <hugo.haesaert@...> > > Huh All ? :) > > I may be wrong about the MS20 (packed away in the attic), but my MS50 > sits beside me as i'm typing this : > > EG1 has dual + outs as you say, but look closely : the one on the > left has a dash and zero volts at the bottom of the graphic (-0V) . > > The other one (right) has this dash and zero volts at the sustain > level, this means the envelope starts somewhere negative of 0V, then > peaks positive of 0V and then decays to 0V which is the sustain level > of the env, at gate off, the release kicks in and the output goes > negative again . > > The negative env out is an inversion of this second out, not of the > one that starts at 0V, which would put the whole envelope below zero . > > EG2's first out, on the left is a full positive env . The one you > call negative (right), starts way neg, then ramps up to zero and then > decays to negative again . Not an inversion here, but merely a shift > to negative . > > The above may be a bit terse, but after your reactions i was > wondering if my brain was going soft . But rejoice, it's not :) > > EG1 > /\ > / \ > / `-----. - - - -0V <- This is where the 2nd out has > / \ it's zero volt point . > -\ufffd `- -0V <- 1st out > > My first attempt at ascimatic, hope it comes out ok, use a fixed > pitch font, pls . > > Hope this has cleared up some "huh"'s ;-) > > Cheers . > > > Keep 'em oscillating :) > > > Hugo > = > > --------------------------- ONElist Sponsor ---------------------------- > > Valentine's Day Shopping Made Simple. > <a href=" http://clickme.onelist.com/ad/SparksValentine7 ">Click Here</a> > > ------------------------------------------------------------------------ > >
Message
Re: EG-mania
2000-02-05 by J. Larry Hendry
Attachments
- No local attachments were found for this message.