MOTM

What you describe is normal.  The signal from A and B IN through the 
mixer with the input switch on NORMAL is *one third of the input level*, 
by design.  The level of the outputs from the Tellun daughterboard are 
fixed and independent of the input levels.

Richard Brewster
http://www.pugix.com

Jonathan Snipes wrote:
> Hey, just a quick question ... my 120 seems to have a very low output  
> compared to the rest of my synth ... my oscillators are from dotcom,  
> and the difference in volume between a raw waveform out of the  
> oscillator &  the output of the 120 (with all the suboctaves turned  
> all the way off, and the A IN knob turned all the way up) is  
> significant ... I also installed the Tellun daughterboard, and the  
> individual suboctave outputs seem to be of normal volume.
>
> Just curious if this is true for others, or if I assembled mine  
> poorly (entirely possible)
>
> -Jonathan
>
>
>  
> Yahoo! Groups Links
>
>
>
>
>