MOTM

There is no problem with thickness.  Yes, it provides 26U plus a little 
gap that is handled with Stooge end caps.  I believe all the rails and 
screws are -- or will be -- available from Stooge Industries.

http://www.stoogeindustries.com/

Richard Brewster

http://www.pugix.com

edibennardo wrote:

>I see, but if rails must be added and not replaced, i guess rails 
>have their own thickness so the modules would probably protrude a 
>bit outward of the case if I'm not mistaking, unless there's a deep 
>gap in those cabinets between the edge of the cabinet and the 
>internal surface where the modules are attached. I can not tell 
>anything from the pics.
>What about the number of U spaces? i calculated that a 22 .com is 
>equivalent to 26 motm U plus some gap, is this correct? I'm not 
>familiar at all with inches in this metric latin world :-)
>
>Enrico (Italy)
>
>
>
>  
>