MOTM

http://www.pugix.com/cabinet_new.htm

Synthesizers.com cabinets fit MOTM quite well.  The Stooge flat rails 
make these wonderfully flexible.  I swap modules in and out all the 
time.  These cabinets are deep enough to hold converted Blacet and CGS 
modules on long Stooge brackets.  The only limitation is that the 4-pot 
long bracket does not fit in the lower part of the double cabinet. The 
way I mount the Power One supplies leaves room for standard MOTM modules 
(such as a MOTM-300 VCO) in front of the supply.

-Richard Brewster

brownchonald wrote:

>Hey Guys,
>
>I was curious if any of you could point me in a direction of where I
>can get a MOTM compatible cabinet.
>
>Synthesizers.com style, but able to fit MOTM.
>
>Thanks,
>Cole
>
>
>  
>