And don't forget to "tin" the tip of the iron occasionally with some solder. Scott =========================================== mate_stubb wrote: > Martin, > > Make sure you have a good soldering iron that has the proper tip temp, > and that your tip is not worn out. Keep it cleaned with a wet sponge. > > Make sure you are touching the tip to both the pot leg and the pad at > the same time to heat them both for a couple seconds before applying > the solder. > > I don't have any trouble soldering pot legs on mine. > > Moe > http://www.stoogeindustries.com > > --- In motm@yahoogroups.com, "marcin_grzelak" <zamarang@...> wrote: > > > > Hi, > > During my solderings works on MOTM's kits I still hit the same time- > > consuming difficulty - soldering Spestrol pots legs. > > Time and again there's one or two legs of there realy "resist" to my > > soldering-iron.The solder "dont't want" to flow through... > > I try to bend leg a little bit in all directions, give bit more > > temperatur - it's realy ardnous till I have a bit solder at another > > side > > > > Any tricks...??? > > > > Martin > > > > > > > > > SPONSORED LINKS > Label > <http://groups.yahoo.com/gads?t=ms&k=Label&w1=Label&w2=Cd+music+label&w3=Independent+music+label&c=3&s=60&.sig=6Ue5iYG1cB-4-PxKoePVpw> > Cd music label > <http://groups.yahoo.com/gads?t=ms&k=Cd+music+label&w1=Label&w2=Cd+music+label&w3=Independent+music+label&c=3&s=60&.sig=HcQO9bFYletC1PmCSbcMNA> > Independent music label > <http://groups.yahoo.com/gads?t=ms&k=Independent+music+label&w1=Label&w2=Cd+music+label&w3=Independent+music+label&c=3&s=60&.sig=4zI39fYigTJ8RURahZcwuw> > > > > ------------------------------------------------------------------------ > YAHOO! GROUPS LINKS > > * Visit your group "motm <http://groups.yahoo.com/group/motm>" on > the web. > > * To unsubscribe from this group, send an email to: > motm-unsubscribe@yahoogroups.com > <mailto:motm-unsubscribe@yahoogroups.com?subject=Unsubscribe> > > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service <http://docs.yahoo.com/info/terms/>. > > > ------------------------------------------------------------------------ >
Message
Re: [motm] Re: Soldering advice
2006-03-19 by Scott E.
Attachments
- No local attachments were found for this message.