MOTM

I like it! We'll need a Stooge panel for "overhead lighting controls." 

Next will come voltage control...


-----Original Message-----
From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of
Geoff
Sent: Monday, January 09, 2006 4:08 PM
Cc: MOTM Forum All
Subject: Re: [motm] OT: Halogen Lamps

The transformer is just a 10:1 step-down transformer, going from your 
household 120AV to 12VAC. It *will* generate some interference, but 
almost entirely just a 60hz hum. I don't find that wall-warts generate 
too much noise, as there's a TON of wal-wart happening. I think it might

be interesting to run the halogen straight off of the 15 volts on your 
power supply... OVERCLOCK THE BULB, MAN! (That would, of course, not 
ACTUALLY be advisable)

-Geoff

Tkacs, Ken wrote:

> Here's a weird question.
>
> IKEA has these small lamps with the bulb enclosure at the end of a 
> pair of telescoping rods. (They're in IKEA's Magiker series; they're 
> only about $12 each). I was thinking they might be good for on top of 
> the modular, so that the lighting could shine down and back onto the 
> faceplates.
>
> But I noticed in the store that they have some kind of transformer 
> brick. I don't really know the theory behind halogen lights-it says 
> they're 12 volts--but seeing that brick kind of reminds me of a 
> fluorescent light's transformer and makes me think that maybe a lamp 
> like this would not be a good mix with audio equipment.
>
> Does anyone know for sure?
>
> Here's a photo if you're interested: 
>
http://www.ikea.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=12&
langId=-1&catalogId=10101&productId=19151 
>
<http://www.ikea.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=12
&langId=-1&catalogId=10101&productId=19151> 
>
>
> Thanks in advance.
>
> Ken T
>




 
Yahoo! Groups Links