MOTM

I would want to be able to use it directly as a 1 shot, too - for
pulse stretching, for instance.

So in delay mode the output jack waits X time to go high (staying high
as long as the input gate is high), while in 1 shot mode the output
jack immediately goes high for X time then goes low again.

X time vc'able would be great.

Moe

--- In motm@yahoogroups.com, Scott Juskiw <scott@t...> wrote:
> I had planned to build a digital gate delay (the TLN-774), but that's 
> been on the back burner for two years now, I may never get it done. 
> So maybe a simple MUUB gate delay would be useful in the meantime. 
> There is space on the MUUB boards for adding a 7555 timer chip.  I'd 
> like to fit two gate delays into 1U of space, so it would have to be 
> very simple, just a delay of the rising edge of the gate, not the 
> falling edge.
> 
> 1. delay time pot and jack
> 2. input gate jack
> 3. output delay jack
> 4. LED
> 
> What other features would we need? Maybe a hold time on the delayed 
> gate, if that's not too complicated for a MUUB.
>