MOTM

After looking at these panels, I think I'd prefer to go 2U and try and  
implement independent S&H stages (normalized to perform ASR and maybe add a  switch 
for your interesting cycle feature) and have some VC Correlation to  at least 
some of the S&Hs.
 
I wouldn't mind losing the internal clock either.
 
JB
 
In a message dated 1/2/2006 4:07:32 P.M. Pacific Standard Time,  
synth1@... writes:

OK,  let's do this:

a) 1U wide
b) S&H functions only
c) 14-bit  accuracy for VCO pitch accuracy

Minimum features

a) internal  clock
b) +-/- edge switch select

Possible features:

a) Output  correlate pot
b) internal clock is CV'd (input jack + possible attenuator  pot)
c) CLK OUT jack
d) switch to select ASR mode or a 'Cycle' mode so  Pulse #1> Out 1, Pulse 
#2>Out 
#2, etc. If there were say 4 outputs,  *each* output is updated every 4th 
pulse.

OK, so what I need is a FPE  panel design! I'll order one this week along 
with 
all my other FPE panels.  I do like tick marks on the pots :) If you don't 
have 
FPE, it's a quick  and easy PC download www.frontpanelexpress.com