MOTM

Thinking of a 1U wide, new noise/S&H module.

Bad news: not a full kit, the pcb would be pre-soldered (teeny SMT parts). Still 
have to wire it up, though :)
Good news: check these features!

a) White/Pink out, digitally generated (Pink is analog filtered).
b) the S&H is a cascaded, 4-channel "shift register" type with *infinite* hold 
time/zero droop (it's 12-bit digitized). There is a switch to either be 'Normal' 
(each int/ext clock samples the Input and passes it to the 4 outputs at once) or 
'Shift' (each clock shifts the previous stage down to the next stage, and In 
always goes to Out #1).

Like I said, not a full kit but a nifty module. And same price as current '101 
kit.

Discuss.

Paul S.