MOTM

The numbers are darn close for the slant cabinet.  The outside width is
48.25" and the "inside" width (space for module face plates) is 46.75", for
26.71 U  If I can squeeze another .5", it will be 27U!

As was pointed out, the rails are different.  I was planning to order some
of Paul's rails and cut them to fit.  The Moog rails are screwed into a
strip of wood "lip" just inside the box and there is enough room to allow
the short screws to set in.

I was hoping someone had the plans all drawn up so I wouldn't have to go
through the trouble but I'll see if I can make up a drawing of a Moog
"upper" cabinet and post it somewhere.  Stay tuned...

	Eric

At 09:29 PM 11/18/99 -0600, J. Larry Hendry wrote:
>From: "J. Larry Hendry" <jlarryh@...>
>
>That was me.  I cant find the dang file.  However, here are the numbers
>
>This is for a slant cabinet.
>
>Depth at bottom 14"
>Depth at top 8.5"
>Height at back 15"
>Height at slant 16"
>
>Obviously, Kevin may have rounded the numbers a bit.  The depths were my
>primary interest.  He did not supply the width, indicating that this Moog
>cabinet was wider than most, indicating to me that some variety of width
>did exist.
>