MOTM

I Wish!
----- Original Message ----- 
From: "Paul Schreiber" <synth1@...>
To: "MOTM litserv" <motm@yahoogroups.com>
Sent: Friday, March 04, 2005 12:27 AM
Subject: [motm] Need 2 beta testers


> 
> I need 2 beta testers for the VC Pulse Divider prototype. Here are the 
> *requirements* :
> 
> a) have a MOTM-950 supply or have one on order (which means I'll bill you and 
> send it with the proto). OR...place an order for one :)
> 
> b) the prototype is *not* a 'module'. It is a pcb about 8 x 10 inches. It needs 
> to lie flat on a surface (not dangling in space) within 24in of the MOTM-950. 
> The jacks are pcb mounted along the 'edges' of the board. There are some 
> switches and pots also soldered on the board.
> 
> c) Although you can run audio through it (up to about 14Khz) that's not the 
> *primary* use. It's a "clocking" module that sits in-between say a LFO and a 
> sequencer. The input can be any thru-zero wave, but the outputs of the divider 
> are (currently) 50% duty cycle square waves of about 0 to +4V. I need testers 
> that have 'things' with external clock inputs.
> 
> d) there is a 'stepped' CV output that is set for 4ths/octaves/5ths that you can 
> drive VCOs, VCFs, etc with. Fixed at 8 steps, but driven by either the input 
> clock or the /N clock (switch selected).
> 
> e) you HAVE to mess with it for some decent time by April 1st. And I don't mean 
> "Oh Sh-t, Paul is going to call me tomorrow! I'd better *find* it!".
> 
> 
> So, if you qualify please send me a *PRIVATE* email.
> 
> Paul S.
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 
> 
> 
> 
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.6.0 - Release Date: 3/2/2005
> 
> 


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.6.0 - Release Date: 3/2/2005