MOTM

--- Tobias Machine Head <tobias@...>
wrote:

> Here's a quantizer in MOTM format. Although it has
> white a metalic/white
> panel. It's also a 1/4 inch banana combo.
> 
> http://www.analogic-acs.com/quantizer.html
> 
> Cheers!
> Tobias Enhus
> 
> 
> 
> > 
> > For quantizing applications the wavetable output
> is used as a control
> > voltage.  In this mode the Miniwave is set to the
> 0-10V scale, which
> > takes positive input voltages and puts out
> positive voltages.  A
> > quantizer PROM has a table that translates the
> incoming voltage to the
> > nearest quantized value, assuming a 1V/octave
> control voltage.  The
> > standard Blacet PROM has 16 quantized scales, and
> the Quantizer PROM
> > offers 256. 
>
http://stretta.com/~matthew/resources/waveproms/index.html
> > (Too bad these are not currently available.)
> > 
> > -Richard Brewster
> > 
> > 
> > Jeff Laity wrote:
> > 
> >> When you do this, are you using the PCM sample
> wave playback as an
> >> audio source or as a control voltage?
> >> 
> >> On Jan 15, 2005, at 4:05 PM, Richard Brewster
> wrote:
> >> 
> >>     Many of us use the Wiard/Blacet Miniwave as a
> quantizer.  It so
> >>     happens
> >>     I was just using it today.
> >> 
> >>     http://www.blacet.com/MW.html
> >> 
> >>     It comes with a quantizer bank in the PROM
> and there is another
> >>     quantizer PROM available.  Check the links on
> the page above.  Larry
> >>     Hendry has a Stooge panel (several different
> ones, actually)
> >>     available
> >>     in MOTM format for the Miniwave, and you can
> also use Front Panel
> >>     Express to make a panel for it.  Dave
> Hylander has a great
> >>     expander for
> >>     the Minwave that holds 10 EPROMs.
> >> 
> >>     http://www.hylander.com/miniwave.html
> >> 
> >>     http://www.wiseguysynth.com/larry/panel.htm
> >> 
> >>     -Richard Brewster
> >> 
> >>     Jeremy wrote:
> >> 
> >>> Hi all,
> >>> 
> >>> Just wondering if there's an analog voltage
> quantizer out there in
> >>> MOTM format? Or something similar? I've been
> using a Serge
> >>> quantizer but the whole banana + 1/4" jack thing
> gets annoying.
> >>> Cheers for any help.
> >>> 
> >>> - Jeremy
> >>> 
> >> 
Excuse my ignorance, why couldnt you take the banana
jacks out and put in their place the 1/4 inch motm
jacks that paul uses?  I dont understand the banana
plug ... is there a ground and a hot wire with them? 
If there is then the 1/4 inch jack should work...  am
I missing something?

John in Miami
> 



		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - now with 250MB free storage. Learn more.
http://info.mail.yahoo.com/mail_250