MOTM

I contacted the analogic-acs folks a few weeks ago when this popped up on AH
since there are no quantizers available in an assembled form for 1/4"
modulars at the moment (cough) - a situation that I hope will change this
year.  Unfortunately, they are not able to take any orders at this time -
they said perhaps by March.  Also, they were unwilling to change the banana
jacks for 1/4" jacks.  There are certainly spacing issues but I couldn't get
them to provide any electrical reason.
 
    Eric 

-----Original Message-----
From: Richard Brewster [mailto:pugix@...] 
Sent: Sunday, January 16, 2005 10:35 PM
To: Tobias Machine Head
Cc: Jeff Laity; MOTM List
Subject: Re: [motm] Quantizer


Anyone on the list have one of these and can give us impressions?  I 
seem to remember some discussion about it a while back.

-Richard Brewster

Tobias Machine Head wrote:

>Here's a quantizer in MOTM format. Although it has white a metalic/white
>panel. It's also a 1/4 inch banana combo.
>
>http://www.analogic-acs.com/quantizer.html
>
>Cheers!
>Tobias Enhus
>
>
>
>  
>
>>For quantizing applications the wavetable output is used as a control
>>voltage.  In this mode the Miniwave is set to the 0-10V scale, which
>>takes positive input voltages and puts out positive voltages.  A
>>quantizer PROM has a table that translates the incoming voltage to the
>>nearest quantized value, assuming a 1V/octave control voltage.  The
>>standard Blacet PROM has 16 quantized scales, and the Quantizer PROM
>>offers 256.  http://stretta.com/~matthew/resources/waveproms/index.html
>>(Too bad these are not currently available.)
>>
>>-Richard Brewster
>>
>>
>>Jeff Laity wrote:
>>
>>    
>>
>>>When you do this, are you using the PCM sample wave playback as an
>>>audio source or as a control voltage?
>>>
>>>On Jan 15, 2005, at 4:05 PM, Richard Brewster wrote:
>>>
>>>    Many of us use the Wiard/Blacet Miniwave as a quantizer.  It so
>>>    happens
>>>    I was just using it today.
>>>
>>>    http://www.blacet.com/MW.html
>>>
>>>    It comes with a quantizer bank in the PROM and there is another
>>>    quantizer PROM available.  Check the links on the page above.  Larry
>>>    Hendry has a Stooge panel (several different ones, actually)
>>>    available
>>>    in MOTM format for the Miniwave, and you can also use Front Panel
>>>    Express to make a panel for it.  Dave Hylander has a great
>>>    expander for
>>>    the Minwave that holds 10 EPROMs.
>>>
>>>    http://www.hylander.com/miniwave.html
>>>
>>>    http://www.wiseguysynth.com/larry/panel.htm
>>>
>>>    -Richard Brewster
>>>
>>>    Jeremy wrote:
>>>
>>>      
>>>
>>>>Hi all,
>>>>
>>>>Just wondering if there's an analog voltage quantizer out there in
>>>>MOTM format? Or something similar? I've been using a Serge
>>>>quantizer but the whole banana + 1/4" jack thing gets annoying.
>>>>Cheers for any help.
>>>>
>>>>- Jeremy
>>>>
>>>>        
>>>>
>>
>>
>>
>>Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>>    
>>
>
>
>  
>



  _____  

Yahoo! Groups Links


*	To visit your group on the web, go to:
http://groups.yahoo.com/group/motm/
  

*	To unsubscribe from this group, send an email to:
motm-unsubscribe@yahoogroups.com
<mailto:motm-unsubscribe@yahoogroups.com?subject=Unsubscribe> 
  

*	Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .