MOTM

This is exactly what I built for Robert 2 years ago.  I think I know 
what Larry is after, I'll tinker a bit...

Scott
/**/

On Sun, 12 Sep 2004, Scott Juskiw wrote:

> I don't mean to step on Larry's parade here, but I think this can 
> already be done with an Oakley Multimix and a bit of elbow grease. I 
> modified my Multimixes so that they can provide a variable DC bias to 
> any of the 3 outputs (-5V to +5V) if nothing is plugged into the 
> input. I also used Larry's normalising scheme so that the three 
> Multimix channels are cascaded. This allows the bias to go right to 
> the 13V limits of the op amps, if you need that much offset. Adding a 
> DC bias to the reversing attenuator function of the Multimix provides 
> quite a variety of CV scaling and biasing. It's great for turning 
> those +/- LFO signals into + only signals (and inverting them at the 
> same time). Plus, there's already panels and boards for the Multimix.
> 
> Details here:
> 
> http://www.tellun.com/motm/mods/oms902/oms902.html