MOTM

Yes, I can certainly understand that!  For DIYers who would like to add 
this feature to any module, check out the PC board Ken Stone made for 
this purpose at my request.  Go to http://www.cgs.synth.net/ and look 
for the CGS56 PC board, Gate Converter.  It has 4 converters built 
around a TL074 chip.  The board is 1.15 x 2 inches in size.  Four of 
these boards would be needed for Paul's VC Divider (assuming 16 
outputs).  The CGS56 could be put to other uses, as well.

-Richard Brewster

Paul Schreiber wrote:

>>If the output square waves go +/-5V instead of 0 to +5V, then they can
>>be inverted by any analog inverter.  I find this useful to produce both
>>phases for control purposes.  If you invert 0 to +5V you get 0 to -5V,
>>which can't be used as a gate or trigger.
>>    
>>
>
>Errr...not going to put 16 level shifters on there! Over 180 parts just for
>that!
>
>Paul S.
>finishing up pc board for the breadboard *today*
>
>
>  
>